35% Glass Fiber Reinforced, High Flow, Halogen free and free of red phosphorous
| Original Document | Technical Datasheet(English) | |||
| Solutions | E-Motors for Power Tools | |||
| Resin ID | PA46-GF35 FR(40) | |||
| Features | Flame RetardantHalogen FreeNon Red PhosphorusHigh FlowFilled & Reinforced | |||
| Additive | Flame Retardant | |||
| Markets | Consumer ProductsElectrical / Electronics | |||
| Processing | Injection | |||
| Diagrams | Stress-strainSecant modulus-strain | |||
| Reinforced | 35% Glass Fiber | |||
| Physical | Dry/Cond.(Sign in to View) | Unit | Test Standard | Test Condition |
|---|---|---|---|---|
Density/Specific Gravity | ***/ *** | g/cm³ | ISO 1183 | |
Mold Shrinkage | ||||
Flow | ***/ * | % | ISO 294-4 | |
Across Flow | ***/ * | % | ISO 294-4 | |
Moisture /Humidity Absorption | ***/ * | % | ISO 62 | |
Spiral Flow | ***/ * | mm | - | 1.0 mm 1000 bar |
| Mechanical | Dry/Cond.(Sign in to View) | Unit | Test Standard | Test Condition |
Tensile Modulus | ***/ *** | Mpa | ISO 527-1/-2 | |
Tensile Modulus | ***/ *** | Mpa | ISO 527-1/-2 | 100°C |
Tensile Modulus | ***/ *** | Mpa | ISO 527-1/-2 | 120°C |
Tensile Modulus | ***/ * | Mpa | ISO 527-1/-2 | 140°C |
Tensile Modulus | ***/ * | Mpa | ISO 527-1/-2 | 160°C |
Tensile Modulus | ***/ *** | Mpa | ISO 527-1/-2 | 1mm thickness |
Tensile Strength | ||||
Break | ***/ *** | Mpa | ISO 527-1/-2 | |
Break | ***/ *** | Mpa | ISO 527-1/-2 | 100°C |
Break | ***/ *** | Mpa | ISO 527-1/-2 | 120°C |
Break | ***/ * | Mpa | ISO 527-1/-2 | 140°C |
Break | ***/ * | Mpa | ISO 527-1/-2 | 160°C |
Break | ***/ *** | Mpa | ISO 527-1/-2 | 1mm thickness |
Tensile Elongation | ||||
Break | ***/ *** | % | ISO 527-1/-2 | |
Break | ***/ *** | % | ISO 527-1/-2 | 120°C |
Break | ***/ * | % | ISO 527-1/-2 | 140°C |
Break | ***/ * | % | ISO 527-1/-2 | 160°C |
Break | ***/ * | % | ISO 527-1/-2 | 1mm thickness |
Flexural Modulus | ***/ *** | Mpa | ISO 178 | |
Flexural Strength | ||||
- | ***/ *** | Mpa | ISO 178 | |
Weld strength | ***/ *** | Mpa | ISO 527-1/-2 | 1mm |
Weld elongation | ***/ *** | % | ISO 527-1/-2 | 1mm |
| Impact | Dry/Cond.(Sign in to View) | Unit | Test Standard | Test Condition |
Charpy Notched Impact Strengh | ||||
23℃ (73℉) | ***/ *** | kJ/m² | ISO 179/1eA | |
Charpy Unnotched Impact Strengh | ||||
23℃ (73℉) | ***/ *** | kJ/m² | ISO 179/1eU | |
| Thermal | Dry/Cond.(Sign in to View) | Unit | Test Standard | Test Condition |
Melt Temperature(Tm) | ***/ * | °C | ISO 11357-1/-3 | 10°C/min |
Glass Transition Temperature | ***/ * | °C | ISO 11357-1/-2 | 10°C/min |
| Flammability | Dry/Cond.(Sign in to View) | Unit | Test Standard | Test Condition |
Flame Rating | ||||
V-0 | ***/ * | mm | UL94 | |
V-0 | ***/ * | mm | IEC 60695-11-10 | |
Glow Wire Flammability Index(GWFI) | ||||
0.8mm | ***/ * | °C | IEC 60695-2-12 | |
| Electrical | Dry/Cond.(Sign in to View) | Unit | Test Standard | Test Condition |
Volume Resistivity | > ***/ *** | Ohm-m | IEC 62631-3-1 | |
Dielectric Constant(Permittivity) | ||||
100Hz | ***/ *** | - | IEC 62631-2-1 | |
1MHz | ***/ *** | - | IEC 62631-2-1 | |
1 GHz | ***/ *** | - | IEC 61189-2-721 | |
10 GHz | ***/ *** | - | IEC 61189-2-721 | |
Dissipation Factor | ||||
100Hz | ***/ *** | E-4 | IEC 62631-2-1 | |
1MHz | ***/ *** | E-4 | IEC 62631-2-1 | |
1 GHz | ***/ *** | E-4 | IEC 61189-2-721 | |
10 GHz | ***/ *** | E-4 | IEC 61189-2-721 | |
Comparative Tracking Index (CTI) | ||||
- | ***/ *** | V | IEC 60112 | |
Dielectric Strength | ***/ *** | kV/mm | IEC 60243-1 |
The information presented on this datasheet was acquired by AjiEng.com from the producer of the material. AjiEng.com makes substantial efforts to assure the accuracy of this data. However, AjiEng.com assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.
