30% Glass Fiber/Glass Beads Reinforced, Injection Molding, Flame Retardant, Heat Stabilized, Excellent Surface Properties, Low Warpage
| Original Document | Technical Datasheet(English) | |||
| Resin ID | PA6-(GF+GB)30 FR(17) | |||
| Features | Heat StabilizedFlame RetardantGood SurfaceLow WarpageFilled & Reinforced | |||
| Additive | Flame RetardantHeat Stabilizer | |||
| Processing | Injection | |||
| Diagrams | Viscosity-shear rateShearstress-shear rateSpecific volume-temperature (pvT) | |||
| Reinforced | 30% Glass Fiber+Glass Bead | |||
| Physical | Dry/Cond.(Sign in to View) | Unit | Test Standard | Test Condition |
|---|---|---|---|---|
Density/Specific Gravity | ***/ *** | g/cm³ | ISO 1183 | |
Mold Shrinkage | ||||
Flow | ***/ * | % | ISO 294-4 | |
Across Flow | ***/ * | % | ISO 294-4 | |
| Mechanical | Dry/Cond.(Sign in to View) | Unit | Test Standard | Test Condition |
Tensile Modulus | ***/ *** | Mpa | ISO 527-1/-2 | |
Tensile Strength | ||||
Break | ***/ *** | Mpa | ISO 527-1/-2 | |
Tensile Elongation | ||||
Break | ***/ *** | % | ISO 527-1/-2 | |
Flexural Modulus | ***/ *** | Mpa | ISO 178 | |
Flexural Strength | ||||
- | ***/ *** | Mpa | ISO 178 | |
| Impact | Dry/Cond.(Sign in to View) | Unit | Test Standard | Test Condition |
Charpy Notched Impact Strengh | ||||
-30℃ (-22℉) | < ***/< *** | kJ/m² | ISO 179/1eA | |
23℃ (73℉) | > ***/< *** | kJ/m² | ISO 179/1eA | |
Charpy Unnotched Impact Strengh | ||||
-30℃ (-22℉) | ***/ *** | kJ/m² | ISO 179/1eU | |
23℃ (73℉) | ***/ *** | kJ/m² | ISO 179/1eU | |
Izod Notched Impact Strengh | ||||
23℃ (73℉) | < ***/ *** | kJ/m² | ISO 180/1A | |
Instrumented Impact Energy | ||||
-30℃ (-22℉)peak | ***/ *** | N | ISO 6603-2 | |
-30℃ (-22℉)Total Energy | ***/ *** | J | ISO 6603-2 | |
23℃ (73℉)peak | ***/ *** | N | ISO 6603-2 | |
23℃ (73℉)Total Energy | ***/ *** | J | ISO 6603-2 | |
| Thermal | Dry/Cond.(Sign in to View) | Unit | Test Standard | Test Condition |
Heat Deflection Temperature(HDT) | ||||
0.45 Mpa (66 psi)（4.6kg/cm²） | ***/ * | °C | ISO 75-1/-2 | |
1.8 Mpa (264 psi)（18.6kg/cm²） | ***/ * | °C | ISO 75-1/-2 | |
Coefficient of Linear Thermal Expansion | ||||
Flow | ***/ * | E-6/°C | ISO 11359-1/-2 | |
Across Flow | ***/ * | E-6/°C | ISO 11359-1/-2 | |
Melt Temperature(Tm) | ***/ * | °C | ISO 11357-1/-3 | 10°C/min |
Ball Pressure Test | ***/ * | °C | IEC 60695-10-2 | |
| Flammability | Dry/Cond.(Sign in to View) | Unit | Test Standard | Test Condition |
Flame Rating | ||||
V-0 | ***/ * | mm | UL94 | |
V-0 | ***/ * | mm | UL94 | |
V-0 | ***/ * | mm | IEC 60695-11-10 | |
V-0 | ***/ * | mm | IEC 60695-11-10 | |
V-0 | ***/ * | mm | IEC 60695-11-10 | |
5VA | ***/ * | mm | UL94 | |
5VA | ***/ * | mm | IEC 60695-11-10 | |
Oxygen Index | ***/ * | % | ISO 4589-1/-2 | |
Glow Wire Flammability Index(GWFI) | ||||
0.75mm | ***/ * | °C | IEC 60695-2-12 | |
1.5mm | ***/ * | °C | IEC 60695-2-12 | |
Glow Wire Ignition Test(GWIT) | ||||
0.75mm | ***/ * | °C | IEC 60695-2-13 | |
1.5mm | ***/ * | °C | IEC 60695-2-13 | |
| Electrical | Dry/Cond.(Sign in to View) | Unit | Test Standard | Test Condition |
Dielectric Strength | ***/ *** | kV/mm | IEC 60243-1 |
The information presented on this datasheet was acquired by AjiEng.com from the producer of the material. AjiEng.com makes substantial efforts to assure the accuracy of this data. However, AjiEng.com assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.
