12% Glass Fiber Reinforced, Injection Molding, Heat Stabilized, Flame Retardant (halogen free)
| Original Document | Technical Datasheet(English) | |||
| Resin ID | (PA66+PA6)-GF12 FR(40+72) | |||
| Features | Heat StabilizedFlame RetardantHalogen FreeFilled & Reinforced | |||
| Processing | Injection | |||
| Diagrams | Stress-strain(Break)Stress-strain (Cond.)(Yield)Secant modulus-strain(Break)Secant modulus-strain (Cond.)(Yield) | |||
| Reinforced | 12% Glass Fiber | |||
| Physical | Dry/Cond.(Sign in to View) | Unit | Test Standard | Test Condition |
|---|---|---|---|---|
Density/Specific Gravity | ***/ *** | g/cm³ | ISO 1183 | |
Mold Shrinkage | ||||
Flow | ***/ * | % | ISO 294-4 | |
Across Flow | ***/ * | % | ISO 294-4 | |
Water Absorption | ***/ * | % | ISO 62 | |
Moisture /Humidity Absorption | ***/ * | % | ISO 62 | |
| Mechanical | Dry/Cond.(Sign in to View) | Unit | Test Standard | Test Condition |
Tensile Modulus | ***/ *** | Mpa | ISO 527-1/-2 | |
Tensile Strength | ||||
Break | ***/ *** | Mpa | ISO 527-1/-2 | |
Tensile Elongation | ||||
Break | ***/ *** | % | ISO 527-1/-2 | |
Flexural Modulus | ***/ *** | Mpa | ISO 178 | |
Flexural Strength | ||||
- | ***/ *** | Mpa | ISO 178 | |
| Impact | Dry/Cond.(Sign in to View) | Unit | Test Standard | Test Condition |
Izod Notched Impact Strengh | ||||
23℃ (73℉) | < ***/< *** | kJ/m² | ISO 180/1A | |
| Thermal | Dry/Cond.(Sign in to View) | Unit | Test Standard | Test Condition |
Heat Deflection Temperature(HDT) | ||||
0.45 Mpa (66 psi)（4.6kg/cm²） | ***/ * | °C | ISO 75-1/-2 | |
1.8 Mpa (264 psi)（18.6kg/cm²） | ***/ * | °C | ISO 75-1/-2 | |
Relative Temperature Index(RTI), Imp | ||||
0.75/0.8mm | ***/ * | °C | UL 746B | |
1.5/1.6 mm | ***/ * | °C | UL 746B | |
Relative Temperature Index(RTI), Elec | ||||
0.36/0.4mm | ***/ * | °C | UL 746B | |
0.75/0.8mm | ***/ * | °C | UL 746B | |
Relative Temperature Index(RTI), Str | ||||
0.36/0.4mm | ***/ * | °C | UL 746B | |
1.5/1.6 mm | ***/ * | °C | UL 746B | |
Melt Temperature(Tm) | ***/ * | °C | ISO 11357-1/-3 | 10°C/min |
| Flammability | Dry/Cond.(Sign in to View) | Unit | Test Standard | Test Condition |
Flame Rating | ||||
V-0 | ***/ * | mm | UL94 | |
V-0 | ***/ * | mm | UL94 | |
V-0 | ***/ * | mm | IEC 60695-11-10 | |
V-0 | ***/ * | mm | IEC 60695-11-10 | |
V-0 | ***/ * | mm | IEC 60695-11-10 | |
V-0 | ***/ * | mm | IEC 60695-11-10 | |
Glow Wire Flammability Index(GWFI) | ||||
0.4mm | ***/ * | °C | IEC 60695-2-12 | |
0.8mm | ***/ * | °C | IEC 60695-2-12 |
The information presented on this datasheet was acquired by AjiEng.com from the producer of the material. AjiEng.com makes substantial efforts to assure the accuracy of this data. However, AjiEng.com assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.
