The main distinguishing feature of Grivory HT1VA-4 FWA Black 9225, when compared to other polyamides, is its good performance at high temperatures. Particular properties are:
• chemical resistance
• excellent hydrolysis resistance
• creep resistance
• mechanical properties at high temperatures
• approved for food and drinking water applications
| Original Document | Technical Datasheet(English) | |||
| Resin ID | PA6T/6I-GF40 | |||
| Availability | AsiaEuropeNorth AmericaMiddle EastLatin AmericaAfricaAustralia and New ZealandSouth & Central America | |||
| Features | Heat ResistanceCreep ResistantFood ContactDrinking Water ContactChemical ResistanceHydrolysis ResistanceFilled & Reinforced | |||
| Applications | Electronics & Electrical ApplicationsAutomotive Interior PartsAutomotive Exterior PartsAutomotive Fuel SystemPowertrain ComponentsAutomotive LightingChassisCooling systemAir intake systemsCompressed air systemsHydraulic systemsAutomotive climate control | |||
| Markets | AutomotiveFood IndustryDrinking & Waste Water Technology | |||
| Appearance | Pellets/GranulesBlack | |||
| Processing | Injection | |||
| Compliance | ACSDVGW W270EU 2011/10/ECFDAKTWNSFWEEE(EU 2002/96/EC)WRAS | |||
| Reinforced | 40% Glass Fiber | |||
| Physical | Dry/Cond.(Sign in to View) | Unit | Test Standard | Test Condition |
|---|---|---|---|---|
Density/Specific Gravity | ***/ *** | g/cm³ | ISO 1183 | |
Mold Shrinkage | ||||
Flow | ***/ * | % | ISO 294 | |
Across Flow | ***/ * | % | ISO 294 | |
Water Absorption | ***/ * | % | ISO 62 | 23°C/saturated |
Moisture /Humidity Absorption | ***/ * | % | ISO 62 | 23°C/50% r.h. |
| Mechanical | Dry/Cond.(Sign in to View) | Unit | Test Standard | Test Condition |
Tensile Modulus | ***/ *** | Mpa | ISO 527 | 1 mm/min |
Tensile Strength | ||||
Break | ***/ *** | Mpa | ISO 527 | 5 mm/min |
Tensile Elongation | ||||
Break | ***/ *** | % | ISO 527 | 5 mm/min |
| Impact | Dry/Cond.(Sign in to View) | Unit | Test Standard | Test Condition |
Charpy Notched Impact Strengh | ||||
-30℃ (-22℉) | ***/ *** | kJ/m² | ISO 179/1eA | |
23℃ (73℉) | ***/ *** | kJ/m² | ISO 179/1eA | |
Charpy Unnotched Impact Strengh | ||||
-30℃ (-22℉) | ***/ *** | kJ/m² | ISO 179/1eU | |
23℃ (73℉) | ***/ *** | kJ/m² | ISO 179/1eU | |
| Hardness | Dry/Cond.(Sign in to View) | Unit | Test Standard | Test Condition |
Ball Indentation Hardness | ***/ *** | Mpa | ISO 2039-1 | |
| Thermal | Dry/Cond.(Sign in to View) | Unit | Test Standard | Test Condition |
Heat Deflection Temperature(HDT) | ||||
1.8 Mpa (264 psi)（18.6kg/cm²） | ***/ * | °C | ISO 75/A | |
8 Mpa (1160 psi)（81.6kg/cm²） | ***/ * | °C | ISO 75/C | |
Coefficient of Linear Thermal Expansion | ||||
Flow | ***/ * | E-6/K | ISO 11359 | 23-55°C |
Across Flow | ***/ * | E-6/K | ISO 11359 | 23-55°C |
Melt Temperature(Tm) | ***/ * | °C | ISO 11357 | DSC |
Continuous Use Temperature | ||||
Long term | ***/ * | °C | ISO 2578 | |
Temperature at Short Circle Operation | ***/ * | °C | ISO 2578 | |
| Flammability | Dry/Cond.(Sign in to View) | Unit | Test Standard | Test Condition |
Flame Rating | ||||
HB | ***/ *** | mm | IEC 60695-11-10 | |
| Electrical | Dry/Cond.(Sign in to View) | Unit | Test Standard | Test Condition |
Volume Resistivity | ***/ *** | Ohm-m | IEC 60093 | |
Surface Resistivity | ***/ *** | Ohm | IEC 60093 | |
Comparative Tracking Index (CTI) | ||||
- | ***/ *** | V | IEC 60112 | |
Dielectric Strength | ***/ *** | kV/mm | IEC 60243-1 |
The information presented on this datasheet was acquired by AjiEng.com from the producer of the material. AjiEng.com makes substantial efforts to assure the accuracy of this data. However, AjiEng.com assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.
