EcoPaXX® Q210E-H

Material Finder
- General
  - Family
  - Supplier
  - Reinforced%
  - Reinforced
  - Processing
  - Additive
  - Compliance
  - Appearance
  - Resin ID
- Specifications
  - Physical
  - Mechanical
  - Impact
  - Hardness
  - Thermal
  - Flammability
  - Electrical
  - Optical
- Features
- Applications
- Markets
- Automotive Specs
- Technical Notes
- Diagrams
- Solutions
My Material
- All Materials
My Search
- All Searches
Prouct Comparison

Aji New Material (Qingdao) Co.,LTD

No.47 Huadingshan Road, Qingdao City, Shandong Province, China.

Tel: +86 532 86871530

Email: info@ajieng.com

PA410

Envalior

Product Description

High Viscosity, Heat Stabilized, Food Contact Quality

EcoPaXX® Q210E-H is a high viscous long aliphatic polyamide which offers excellent wear & friction properties at high humidity for use in gears, food conveyer belt parts and abrasive monofilaments.

General

Original Document	Technical Datasheet(English) 
Solutions	Abrasive brush monofilament
Resin ID	PA410
Features	Heat Stabilized Wear/Abrasion Resistance Low Friction/Wear Bio-based Food Contact High Viscosity Low Moisture Absorption
Additive	Heat Stabilizer
Applications	Filament gears Monofilament Fiber
Markets	Consumer Products Automotive
Processing	Injection Extrusion
Automotive Specs	Hyundai-KIA MS211-66
Diagrams	Stress-strain Stress-Cycles (Tensile Fatigue SN diagrams)(8Hz T R=0.1) Dynamic Shear modulus (G storage)-temperature Dynamic Shear modulus-temperature Viscosity-shear rate Shearstress-shear rate
Biobased/Renewable	Yes

Specifications

Physical	Dry/Cond.(Sign in to View)	Unit	Test Standard	Test Condition
Density/Specific Gravity	*/ *	g/cm³	ISO 1183
Melt Volume Flow Rate(MVR)
280°C/2.16 kg	**/	cm³/10 min	ISO 1133
Melt Mass Flow Rate(MFR)
280°C/2.16 kg	**/	g/10 min	ISO 1133
Mold Shrinkage
Flow	**/	%	ISO 294-4
Across Flow	**/	%	ISO 294-4
Water Absorption	**/	%	ISO 62
Moisture /Humidity Absorption	**/	%	ISO 62
Viscosity	**/	cm³/g	ISO 307, 1157, 1628
Mechanical	Dry/Cond.(Sign in to View)	Unit	Test Standard	Test Condition
Tensile Modulus	*/ *	Mpa	ISO 527-1/-2
Tensile Modulus	*/ *	Mpa	ISO 527-1/-2	-40°C
Tensile Modulus	*/ *	Mpa	ISO 527-1/-2	100°C
Tensile Modulus	*/ *	Mpa	ISO 527-1/-2	120°C
Tensile Modulus	**/	Mpa	ISO 527-1/-2	140°C
Tensile Modulus	*/ *	Mpa	ISO 527-1/-2	40°C
Tensile Modulus	*/ *	Mpa	ISO 527-1/-2	80°C
Tensile Strength
Yield	*/ *	Mpa	ISO 527-1/-2
Yield	**/	Mpa	ISO 527-1/-2	-40°C
Yield	**/	Mpa	ISO 527-1/-2	100°C
Tensile Elongation
Yield	*/ *	%	ISO 527-1/-2
Yield	**/	%	ISO 527-1/-2	-40°C
Nominal Tensile Strain at Break	*/> *	%	ISO 527-1/-2
Nominal Tensile Strain at Break	*/ *	%	ISO 527-1/-2	-40°C
Nominal Tensile Strain at Break	> */> *	%	ISO 527-1/-2	100°C
Nominal Tensile Strain at Break	> */> *	%	ISO 527-1/-2	120°C
Flexural Modulus	*/ *	Mpa	ISO 178
Flexural Modulus	**/	Mpa	ISO 178	120°C
Flexural Strength
-	*/ *	Mpa	ISO 178
-	**/	Mpa	ISO 178	120°C
Weld strength	*/ *	Mpa	ISO 527-1/-2	4mm
Weld elongation	*/ *	%	ISO 527-1/-2	4mm
Impact	Dry/Cond.(Sign in to View)	Unit	Test Standard	Test Condition
Charpy Notched Impact Strengh
-30℃ (-22℉)	*/ *	kJ/m²	ISO 179/1eA
23℃ (73℉)	*/ *	kJ/m²	ISO 179/1eA
Charpy Unnotched Impact Strengh
-30℃ (-22℉)	*/ *	kJ/m²	ISO 179/1eU
23℃ (73℉)	*/ *	kJ/m²	ISO 179/1eU
Thermal	Dry/Cond.(Sign in to View)	Unit	Test Standard	Test Condition
Heat Deflection Temperature(HDT)
0.45 Mpa (66 psi)（4.6kg/cm²）	**/	°C	ISO 75-1/-2
1.8 Mpa (264 psi)（18.6kg/cm²）	**/	°C	ISO 75-1/-2
Coefficient of Linear Thermal Expansion
Flow	**/	E-6/°C	ISO 11359-1/-2
Across Flow	**/	E-6/°C	ISO 11359-1/-2
Melt Temperature(Tm)	**/	°C	ISO 11357-1/-3	10°C/min
Temperature index (TI)-Tensile Strength
2500 h	**/	°C	IEC 60216
5000 h	**/	°C	IEC 60216
10000 h	**/	°C	IEC 60216
Flammability	Dry/Cond.(Sign in to View)	Unit	Test Standard	Test Condition
Oxygen Index	**/	%	ISO 4589-1/-2

The information presented on this datasheet was acquired by AjiEng.com from the producer of the material. AjiEng.com makes substantial efforts to assure the accuracy of this data. However, AjiEng.com assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.

Sign in | Register

Material Finder

General

Specifications

My Material

My Search

Aji New Material (Qingdao) Co.,LTD

No.47 Huadingshan Road, Qingdao City, Shandong Province, China.

Tel: +86 532 86871530

Email: info@ajieng.com

EcoPaXX® Q210E-H

PA410

Envalior

Product Description

General

Technical Datasheet(English) 

Abrasive brush monofilament

PA410

Heat Stabilized

Wear/Abrasion Resistance

Low Friction/Wear

Bio-based

Food Contact

High Viscosity

Low Moisture Absorption

Heat Stabilizer

Filament

gears

Monofilament Fiber

Consumer Products

Automotive

Injection

Extrusion

Hyundai-KIA MS211-66

Stress-Cycles (Tensile Fatigue SN diagrams)(8Hz T R=0.1) 120|Cycles|MPa|Cycles|Stress in MPa|854:25@1000000:23@26500000:22.5@60000000:18.5{n}140|Cycles|MPa|Cycles|Stress in MPa|2082:24.65@3800000:22.65@10000000:18

Viscosity-shear rate 280|1/s|Pa s|Shear rate in 1/s|Viscosity in Pa s|0.1:1045.45644@1:1040.59645@10:994.96143@21.5443:943.2859999999999@46.4159:851.90266@59.6:811.91655@100:713.84604@120:675.74224@246:516.1820300000001@645:321@1360:209@2930:131@8230:68.09999999999999@18200:40.9

Shearstress-shear rate 280|1/s|Pa|Shear rate in 1/s|Shearstress in Pa|0.1:104.546@1:1040.6@10:9949.610000000001@21.5443:20322.4@46.4159:39541.8@59.6:48390.2@100:71384.60000000001@120:81089.10000000001@246:126981@645:207045@1360:284240@2930:383830@8230:560463@18200:744380

Yes

Specifications

Density/Specific Gravity

Melt Volume Flow Rate(MVR)

280°C/2.16 kg

Melt Mass Flow Rate(MFR)

280°C/2.16 kg

Mold Shrinkage

Flow

Across Flow

Water Absorption

Moisture /Humidity Absorption

Viscosity

Tensile Modulus

Tensile Modulus

-40°C

Tensile Modulus

100°C

Tensile Modulus

120°C

Tensile Modulus

140°C

Tensile Modulus

40°C

Tensile Modulus

80°C

Tensile Strength

Yield

Yield

-40°C

Yield

100°C

Tensile Elongation

Yield

Yield

-40°C

Nominal Tensile Strain at Break

Nominal Tensile Strain at Break

-40°C

Nominal Tensile Strain at Break

100°C

Nominal Tensile Strain at Break

120°C

Stress-Cycles (Tensile Fatigue SN diagrams)(8Hz T R=0.1)

Viscosity-shear rate

Shearstress-shear rate