PBR F0310 is polybutene-1 produced by the homogeneous bulk -polymerization process and ethylene is used as comonomer. The product has the characteristics of low melting point and good compatibility with polypropylene.
Applications
It is used to modify the sealing behavior of PP based films, in which it is used to reduce the seal initiation temperature of CPP/BOPP sealing layers.
| Original Document | Technical Datasheet(Chinese&English) | |||
| Features | Good Heat Seal | |||
| Applications | FilmCompounding/BlendingCPP FilmBOPP膜 | |||
| Processing | Compounding | |||
| Physical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
|---|---|---|---|
Melt Mass Flow Rate(MFR) | |||
190℃/2.16 kg | *** g/10min | GB/T 3682.1 | |
230°C/2.16 kg | *** g/10min | GB/T 3682.1 | |
| Mechanical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Tensile Strength | |||
Yield | *** Mpa | GB/T 1040.2 | |
Tensile Elongation | |||
Nominal Tensile Strain at Break | *** % | GB/T 1040.2 | |
Flexural Modulus | *** Mpa | GB/T 9341.2 | |
| Impact | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Charpy Notched Impact Strengh | |||
23℃ (73℉) | *** kJ/m² | GB/T 1043.1 | |
| Thermal | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Vicat Softening Temperature(VST) | *** °C | Internal | |
Melt Temperature(Tm) | *** °C | Internal |
The information presented on this datasheet was acquired by AjiEng.com from the producer of the material. AjiEng.com makes substantial efforts to assure the accuracy of this data. However, AjiEng.com assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.
