Medium Viscosity, Nucleated, Lubricated, Film Extrusion, Food Contact Quality
| Original Document | Technical Datasheet(English) | |||
| Resin ID | PA6 | |||
| Features | LubricatedFood ContactMedium viscosityNucleated | |||
| Additive | LubricantNucleating Agent | |||
| Applications | Film | |||
| Processing | ExtrusionFilm Extrusion | |||
| Diagrams | Viscosity-shear rateShearstress-shear rate | |||
| Physical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
|---|---|---|---|
Density/Specific Gravity | *** g/cm³ | ISO 1183 | |
Viscosity | *** cm³/g | ISO 307, 1157, 1628 | Viscosity number |
Viscosity | *** Pa-s | Internal | Melt Viscosity (260 °C |
| Mechanical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Coefficient of Friction | *** - | ISO 8295 | Dynamic |
Coefficient of Friction | *** - | ISO 8295 | Static |
Modulus of Elasticity | *** Mpa | Internal | 50 mm/min |
| Thermal | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Specific Heat | *** J/kg-K | - | |
Specific Heat | *** J/kg-K | - | Average,20-150 °C |
Coefficient of Linear Thermal Expansion | |||
Flow | *** E-6/°C | ISO 11359-1/-2 | |
| Optical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Light Transmission | *** % | Internal | Film |
| Film | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Tested Film Thickness | *** μm | Internal | cast film |
Tensile Strength | |||
Yield | *** Mpa | ISO 527-3 | parallel |
Break | *** Mpa | ISO 527-3 | parallel |
Tensile Elongation | |||
Break | *** % | ISO 527-3 | parallel |
Piercing strength | *** J/m | Internal | |
Trouser Tear | *** kN/m | ISO 6383-1 | parallel |
Water Vapor Transmission Rate | *** g/m²/24 hr | DIS 15106-1/-3 | |
Oxygen permeability | *** cm³/m²/bar/24 hr | DIS 15105-1/-2 | |
Oxygen permeability | *** cm³/m²/bar/24 hr | DIS 15105-1/-2 |
The information presented on this datasheet was acquired by AjiEng.com from the producer of the material. AjiEng.com makes substantial efforts to assure the accuracy of this data. However, AjiEng.com assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.
