Delrin® 500 is a medium viscosity resin for general purpose use. Delrin® 500 provides optimum mechanical performance.
| Physical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
|---|---|---|---|
Melt Mass Flow Rate(MFR) | |||
190℃/1.05 kg | *** g/10min | ASTM D1238 | |
| Mechanical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Tensile Modulus | *** Mpa | ASTM D638 | 5mm/min |
Tensile Strength | |||
Yield | *** Mpa | ASTM D638 | 5mm/min |
Tensile Elongation | |||
Yield | *** % | ASTM D638 | 5mm/min |
Break | *** % | ASTM D638 | 5mm/min |
Flexural Modulus | *** Mpa | ASTM D790 | |
Flexural Strength | |||
5% strain | *** Mpa | ASTM D 790 | |
| Impact | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Izod Notched Impact Strengh | |||
- | *** J/m | ASTM D 256 | |
Izod Unnotched Impact Strengh | |||
- | *** J/m | ASTM D 4812 | |
| Thermal | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Heat Deflection Temperature(HDT) | |||
0.45 Mpa (66 psi)（4.6kg/cm²） | *** °C | ASTM D648 | Unannealed |
1.8 Mpa (264 psi)（18.6kg/cm²） | *** °C | ASTM D648 | Unannealed |
Coefficient of Linear Thermal Expansion | |||
Flow | *** E-6/°C | ASTM E831 | 23 to 55℃ |
Across Flow | *** E-6/°C | ASTM E831 | 23 to 55℃ |
Melt Temperature(Tm) | *** °C | ASTM D3418 |
The information presented on this datasheet was acquired by AjiEng.com from the producer of the material. AjiEng.com makes substantial efforts to assure the accuracy of this data. However, AjiEng.com assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.
