Recycled PA66, injection moulding grade. Toughened. Heat stabilized. Blue colour.
The recycled material has been developed to reduce its environmental impact in comparison to traditional virgin options. Produced with selected feedstock coming from polymerization, yarn and compounding plants.
| Original Document | Technical Datasheet(English) | |||
| Resin ID | PA66-I | |||
| Availability | Europe | |||
| Features | Toughened/Impact ModifiedHeat StabilizedRecycled Contained | |||
| Additive | Release Agent | |||
| Markets | Industrial ApplicationsConsumer ProductsAutomotiveTransportation | |||
| Appearance | Pellets/GranulesBlue | |||
| Processing | Injection | |||
| Recycled Content | 100% Unspecified Recycled | |||
| Physical | Dry/Cond.(Sign in to View) | Unit | Test Standard | Test Condition |
|---|---|---|---|---|
Density/Specific Gravity | ***/ *** | g/cm³ | ISO 1183 | |
Melt Mass Flow Rate(MFR) | ||||
275℃/2.16 kg | ***/ * | g/10min | ISO 1133 | |
Water Absorption | ***/ * | % | ISO 62 | immersion at 23°C, 2mm thk |
Moisture /Humidity Absorption | ***/ * | % | ISO 62 | 23°C/50%RH, 2mm thk |
| Mechanical | Dry/Cond.(Sign in to View) | Unit | Test Standard | Test Condition |
Tensile Modulus | ***/ *** | Mpa | ISO 527-2/1A | 1mm/min |
Tensile Strength | ||||
Yield | ***/ *** | Mpa | ISO 527-2/1A | 50mm/min |
Tensile Elongation | ||||
Nominal Tensile Strain at Break | ***/ *** | % | ISO 527-2/1A | 50mm/min |
Flexural Modulus | ***/ *** | Mpa | ISO 178 | 2mm/min |
Flexural Strength | ||||
- | ***/ *** | Mpa | ISO 178 | 2mm/min |
| Impact | Dry/Cond.(Sign in to View) | Unit | Test Standard | Test Condition |
Charpy Notched Impact Strengh | ||||
23℃ (73℉) | ***/ * | kJ/m² | ISO 179/1eA | |
| Thermal | Dry/Cond.(Sign in to View) | Unit | Test Standard | Test Condition |
Melt Temperature(Tm) | ***/ * | °C | ISO 11357-1/-3 | 10°C/min |
| Flammability | Dry/Cond.(Sign in to View) | Unit | Test Standard | Test Condition |
Burning Rate | < ***/ * | mm/min | ISO 3795 | 3mm |
The information presented on this datasheet was acquired by AjiEng.com from the producer of the material. AjiEng.com makes substantial efforts to assure the accuracy of this data. However, AjiEng.com assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.
