PA6/ABS blend, medium viscosity extrusion grade. Heat stabilized. Natural colour.
Suitable for parts requiring low moisture absorption and high dimensional stability. Also apt for 3D printing
Formerly Known As LX19268
| Original Document | Technical Datasheet(English) | |||
| Resin ID | PA6+ABS | |||
| Availability | AsiaEuropeNorth AmericaMiddle EastLatin AmericaAfricaAustralia and New ZealandSouth & Central America | |||
| Features | Heat StabilizedGood SurfaceDimensional StabilityMedium viscosityLow Moisture Absorption | |||
| Additive | Release AgentLubricant | |||
| Markets | Industrial ApplicationsConsumer ProductsAutomotiveTransportation | |||
| Appearance | Pellets/GranulesNatural Color | |||
| Processing | ExtrusionProfile Extrusion3D Printing | |||
| Physical | Dry/Cond.(Sign in to View) | Unit | Test Standard | Test Condition |
|---|---|---|---|---|
Density/Specific Gravity | ***/ *** | g/cm³ | ISO 1183 | |
Water Absorption | ***/ * | % | ISO 62 | immersion at 23°C, 2mm thk |
Moisture /Humidity Absorption | ***/ * | % | ISO 62 | 23°C/50%RH, 2mm thk |
| Mechanical | Dry/Cond.(Sign in to View) | Unit | Test Standard | Test Condition |
Tensile Modulus | ***/ *** | Mpa | ISO 527-2/1A | 1mm/min |
Tensile Strength | ||||
Yield | ***/ *** | Mpa | ISO 527-2/1A | 50mm/min |
Tensile Elongation | ||||
Yield | ***/ *** | % | ISO 527-2/1A | 50mm/min |
Nominal Tensile Strain at Break | > ***/ *** | % | ISO 527-2/1A | 50mm/min |
Flexural Modulus | ***/ *** | Mpa | ISO 178 | 2mm/min |
Flexural Strength | ||||
- | ***/ *** | Mpa | ISO 178 | 2mm/min |
| Impact | Dry/Cond.(Sign in to View) | Unit | Test Standard | Test Condition |
Charpy Notched Impact Strengh | ||||
-30℃ (-22℉) | ***/ * | kJ/m² | ISO 179/1eA | |
23℃ (73℉) | ***/ *** | kJ/m² | ISO 179/1eA | |
Charpy Unnotched Impact Strengh | ||||
23℃ (73℉) | ***/ *** | kJ/m² | ISO 179/1eU | |
| Thermal | Dry/Cond.(Sign in to View) | Unit | Test Standard | Test Condition |
Vicat Softening Temperature(VST) | ***/ * | °C | ISO 306/B50 | 50°C/h 50N |
Melt Temperature(Tm) | ***/ * | °C | ISO 11357-1/-3 | 10°C/min |
The information presented on this datasheet was acquired by AjiEng.com from the producer of the material. AjiEng.com makes substantial efforts to assure the accuracy of this data. However, AjiEng.com assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.
