ALTUGLAS™ PMMA V825T is both an injection and extrusion resin with high heat resistance.
MARKETS / APPLICATIONS :
Automotive & Transportation
Health, Hygiene & Beauty
Building & Construction
Composites & advanced materials
Consumer Electronics
AUTOMOTIVE SPECIFICATIONS :
Ameca listed
| Original Document | Technical Datasheet(English) | |||
| Resin ID | PMMA | |||
| Availability | AsiaEurope | |||
| Features | Heat ResistanceAnti-Scratch | |||
| Markets | Consumer ProductsHealthcareAutomotiveElectrical / ElectronicsBuilding & ConstructionTransportationHygieneBeauty | |||
| Appearance | Pellets/GranulesClear/Transparent | |||
| Processing | InjectionExtrusion | |||
| Compliance | AMECA | |||
| Automotive Specs | FORD WSS-M4D776-B1GM(General Motors) QK 003213 Color: 101 ClearSAE (Society of Automotive Engineers) SAE J576BMW GS 93016 (PMMA type 528)FORD WSS-M4D776-B2GM(General Motors) GMW16335P-PMMA-T2HFHyundai-KIA MS235-01 Type AStellantis FTM 60-1104Renault-Nissan(RNPO) EP10-1B | |||
| Physical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
|---|---|---|---|
Density/Specific Gravity | *** g/cm³ | ISO 1183 | |
Melt Mass Flow Rate(MFR) | |||
230°C/3.8 kg | *** g/10 min | ISO 1133 | |
Mold Shrinkage | |||
Flow | ***~*** % | ASTM D955 | |
Water Absorption | *** % | ISO 62 | Equilibrium, 23°C, 50% RH |
| Mechanical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Tensile Strength | |||
Break | *** Mpa | ISO 527-2/5 | 23°C |
Tensile Elongation | |||
Break | *** % | ISO 527-2/5 | 23°C |
Flexural Modulus | *** Mpa | ISO 178 | 23°C |
Flexural Strength | |||
- | *** Mpa | ISO 178 | 23°C |
Compressive Strength | *** Mpa | ISO 604 | 23°C |
| Impact | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Charpy Notched Impact Strengh | |||
23℃ (73℉) | *** kJ/m² | ISO 179/1eA | |
Charpy Unnotched Impact Strengh | |||
23℃ (73℉) | *** kJ/m² | ISO 179/1eU | |
Izod Notched Impact Strengh | |||
23℃ (73℉) | *** kJ/m² | ISO 180/1A | |
| Hardness | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Rockwell M | *** M | ASTM D 785 | |
| Thermal | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Heat Deflection Temperature(HDT) | |||
0.45 Mpa (66 psi)（4.6kg/cm²） | *** °C | ISO 75-2/B | Annealed |
1.8 Mpa (264 psi)（18.6kg/cm²） | *** °C | ISO 75-2/A | Annealed |
Vicat Softening Temperature(VST) | *** °C | ISO 306/B50 | |
Specific Heat | *** J/kg/°C | - | |
Coefficient of Linear Thermal Expansion | |||
Flow | *** E-6/°C | ASTM D 696 | -30 to 23°C |
| Flammability | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Flame Rating | |||
HB | *** mm | UL94 | |
| Optical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Light Transmission | *** % | ASTM D1003 | |
Haze | *** % | ASTM D1003 | |
Refractive Index | *** - | ISO 489 | Method B |
The information presented on this datasheet was acquired by AjiEng.com from the producer of the material. AjiEng.com makes substantial efforts to assure the accuracy of this data. However, AjiEng.com assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.
