PA66 40% glass fibre and mineral reinforced injection moulding grade, heat stabilized. Black colour
Suitable for parts requiring high stiffness, good mechanical resistance and excellent heat ageing properties retention, good dimensional stability.
Formerly Known As N66MG40HSL BK
| Original Document | Technical Datasheet(English) | |||
| Resin ID | PA66-(GF+MD)40 | |||
| Availability | AsiaEuropeNorth AmericaMiddle EastLatin AmericaAfricaAustralia and New ZealandSouth & Central America | |||
| Features | High Stiffness/RigidityGood Heat AgingDimensional StabilityLow WarpageFilled & Reinforced | |||
| Additive | Release Agent | |||
| Markets | AutomotiveTransportation | |||
| Appearance | Pellets/GranulesBlack | |||
| Processing | Injection | |||
| Diagrams | Coefficient of Linear Thermal Expansion(CTE)-Temperature | |||
| Reinforced | Glass FiberMineral40% Glass Fiber+Minal | |||
| Physical | Dry/Cond.(Sign in to View) | Unit | Test Standard | Test Condition |
|---|---|---|---|---|
Density/Specific Gravity | ***/ *** | g/cm³ | ISO 1183 | |
Melt Mass Flow Rate(MFR) | ||||
275℃/3.25 kg | ***/ * | g/10min | ISO 1133 | |
Mold Shrinkage | ||||
Flow | ***/ * | % | ISO 294-4 | 280°C Melt Temp, 90°C Mold Temp, 60 MPa Cavity Press |
Across Flow | ***/ * | % | ISO 294-4 | 280°C Melt Temp, 90°C Mold Temp, 60 MPa Cavity Press |
Viscosity | ***/ * | cm³/g | ISO 307 | Sulfuric Acid |
| Mechanical | Dry/Cond.(Sign in to View) | Unit | Test Standard | Test Condition |
Tensile Modulus | ***/ *** | Mpa | ISO 527-2/1A | 1mm/min |
Tensile Strength | ||||
Break | ***/ *** | Mpa | ISO 527-2/1A | 5mm/min |
Tensile Elongation | ||||
Break | ***/ *** | % | ISO 527-2/1A | 5mm/min |
Flexural Modulus | ***/ *** | Mpa | ISO 178 | 2mm/min |
Flexural Strength | ||||
- | ***/ *** | Mpa | ISO 178 | 2mm/min |
| Impact | Dry/Cond.(Sign in to View) | Unit | Test Standard | Test Condition |
Charpy Notched Impact Strengh | ||||
-30℃ (-22℉) | ***/ *** | kJ/m² | ISO 179/1eA | |
23℃ (73℉) | ***/ *** | kJ/m² | ISO 179/1eA | |
Charpy Unnotched Impact Strengh | ||||
-30℃ (-22℉) | ***/ *** | kJ/m² | ISO 179/1eU | |
23℃ (73℉) | ***/ *** | kJ/m² | ISO 179/1eU | |
Izod Notched Impact Strengh | ||||
-30℃ (-22℉) | ***/ *** | kJ/m² | ISO 180/1A | |
23℃ (73℉) | ***/ *** | kJ/m² | ISO 180/1A | |
| Thermal | Dry/Cond.(Sign in to View) | Unit | Test Standard | Test Condition |
Coefficient of Linear Thermal Expansion | ||||
Flow | ***/ * | E-6/K | ISO 11359-1/-2 | |
Across Flow | ***/ * | E-6/K | ISO 11359-1/-2 | |
Melt Temperature(Tm) | ***/ * | °C | ISO 11357-1/-3 | 10°C/min |
| Flammability | Dry/Cond.(Sign in to View) | Unit | Test Standard | Test Condition |
Flame Rating | ||||
HB | ***/ * | mm | UL94 | |
Burning Rate | / * | mm/min | ISO 3795 | 3mm |
| Electrical | Dry/Cond.(Sign in to View) | Unit | Test Standard | Test Condition |
Volume Resistivity | ***/ *** | Ohm-m | IEC 62631-3-1 | 500V |
Surface Resistivity | ***/ *** | Ohm | IEC 62631-3-2 | 500V |
The information presented on this datasheet was acquired by AjiEng.com from the producer of the material. AjiEng.com makes substantial efforts to assure the accuracy of this data. However, AjiEng.com assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.
