Type: Estane® 58201 is an 82A Polyether-type thermoplastic polyurethane (TPU) compound.
Features: Tear resistant properties.
Uses: Injection Molding and general extrusion techniques.
| Original Document | Technical Datasheet(English) | |||
| Availability | EuropeMiddle EastAfricaAustralia and New Zealand | |||
| Features | High Tear Strength | |||
| Processing | InjectionExtrusion | |||
| Physical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
|---|---|---|---|
Density/Specific Gravity | *** g/cm³ | ASTM D792 | |
Abrasion resistance | *** mm³ | DIN 53516 | |
| Mechanical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Tensile Strength | |||
- | *** Mpa | ASTM D 638 | |
- | *** Mpa | ASTM D 412 | |
at 50% strain | *** Mpa | ASTM D 638 | |
at 50% strain | *** Mpa | ASTM D 412 | |
at 100% strain | *** Mpa | ASTM D 412 | |
at 100% strain | *** Mpa | ASTM D 638 | |
at 300% strain | *** Mpa | ASTM D 638 | |
at 300% strain | *** Mpa | ASTM D 412 | |
Tensile Elongation | |||
Break | *** % | ASTM D638 | |
Tear Strength | *** kN/m | ASTM D 624 | Die C |
Compression Set | *** % | ASTM D 395 | 22 hours , 23°C |
Compression Set | *** % | ASTM D 395 | 22 hours , 70°C |
Rebound Resilience | *** % | DIN 53512 | |
| Impact | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Brittleness Temperature | *** °C | DIN 53546 | |
| Hardness | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Shore A hardness | *** A | ASTM D 2240 |
The information presented on this datasheet was acquired by AjiEng.com from the producer of the material. AjiEng.com makes substantial efforts to assure the accuracy of this data. However, AjiEng.com assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.
