| Physical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Density/Specific Gravity |
*** g/cm³
| ISO 1183 | |
Mold Shrinkage | | | |
Flow |
***~*** % | Internal | 4mm |
Across Flow |
***~*** % | Internal | 4mm |
Water Absorption |
*** %
| ISO 62 | 23℃,24hrs |
| Mechanical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Tensile Strength | | | |
Yield |
*** Mpa | ISO 527-2/50 | |
Tensile Elongation | | | |
Nominal Tensile Strain at Break |
*** % | ISO 527-1/-2 | min. |
Flexural Modulus |
*** Mpa
| ISO 178 | 2 mm/min |
Flexural Strength | | | |
- |
*** Mpa | ISO 178 | 2 mm/min |
| Impact | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Charpy Notched Impact Strengh | | | |
23℃ (73℉) |
*** kJ/m² | ISO 179 | |
Charpy Unnotched Impact Strengh | | | |
23℃ (73℉) |
*** kJ/m² | ISO 179 | |
| Thermal | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Heat Deflection Temperature(HDT) | | | |
1.8 Mpa (264 psi)（18.6kg/cm²） |
*** °C | ISO 75-2/A | Unannealed |
Relative Temperature Index(RTI), Imp | | | |
1.5/1.6 mm |
*** °C | UL 746B | |
Relative Temperature Index(RTI), Elec | | | |
1.5/1.6 mm |
*** °C | UL 746B | |
Relative Temperature Index(RTI), Str | | | |
1.5/1.6 mm |
*** °C | UL 746B | |
Coefficient of Linear Thermal Expansion | | | |
Flow |
*** E-6 cm/cm/℃ | ISO 11359-2 | |
Across Flow |
*** E-6 cm/cm/℃ | ISO 11359-2 | |
| Flammability | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Flame Rating | | | |
V-0 |
*** mm | UL94 | |
5VA |
*** mm | UL94 | |
Glow Wire Flammability Index(GWFI) | | | |
1.5mm |
*** °C | IEC 60695-2-12 | |
2mm |
*** °C | IEC 60695-2-12 | |
Glow Wire Ignition Test(GWIT) | | | |
1.5mm |
*** °C | IEC 60695-2-13 | |
2.0mm |
*** °C | IEC 60695-2-13 | |
| Electrical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Volume Resistivity |
*** Ohm-cm
| IEC 60093 | min. |
Surface Resistivity |
*** Ohm
| IEC 60093 | min. |
| Optical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Light Transmission |
*** %
| ASTM D1003 | 3000 μm |
The information presented on this datasheet was acquired by AjiEng.com from the producer of the material. AjiEng.com makes substantial efforts to assure the accuracy of this data. However, AjiEng.com assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.
