Ultramid® D3EG10 FC Aqua bk 23285 is applicable for plastic parts, where the approvals of material for drinking water contact and direct food contact is a mandatory requirement.
The product is approved according to
· 21 CFR FDA § 177.1500 "Nylon resins". and the coloration complies with 21 CFR FDA § 178.3297 "Colorants for polymers. (for repeated use applications only) The finished article may not be used in contact with alcohol.
· European Food Contact European Food Contact Commission Regulation (EU) 10/2011
· GMP (EC) n°2023/2006
and has the approvals for drinking water regulations of
· KTW
· DVGW W270
· WRAS
· ACS (disclosure of ingredients)
· NSF (disclosure of ingredients)
| Original Document | Technical Datasheet(English) | |||
| Resin ID | PA*-GF50 | |||
| Availability | Europe | |||
| Features | Food ContactDrinking Water ContactFilled & Reinforced | |||
| Appearance | Pellets/GranulesBlack | |||
| Processing | Injection | |||
| Compliance | ACSDVGW W270EU 2011/10/ECFDAKTWNSFWRAS | |||
| Diagrams | Viscosity-shear rateShearstress-shear rateStress-strain (isochronous)(Creep) 23°C (cond.)Creep modulus-time 23°C (cond.) | |||
| Reinforced | 50% Glass Fiber | |||
| Physical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
|---|---|---|---|
Density/Specific Gravity | *** g/cm³ | ISO 1183 | |
Mold Shrinkage | |||
Flow | *** % | ISO 294-4, 2577 | |
Across Flow | *** % | ISO 294-4, 2577 | |
Water Absorption | *** % | ISO 62 | |
Moisture /Humidity Absorption | *** % | ISO 62 | |
Viscosity | *** cm³/g | ISO 307, 1157, 1628 | |
| Mechanical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Tensile Modulus | *** Mpa | ISO 527-1/-2 | Cond. |
Tensile Modulus | *** Mpa | ISO 527-1/-2 | Dry |
Tensile Strength | |||
Break | *** Mpa | ISO 527-1/-2 | Cond. |
Break | *** Mpa | ISO 527-1/-2 | Dry |
Tensile Elongation | |||
Break | *** % | ISO 527-1/-2 | Cond. |
Break | *** % | ISO 527-1/-2 | Dry |
Tensile Creep Modulus | |||
1h | *** Mpa | ISO 899-1 | Cond. |
1000h | *** Mpa | ISO 899-1 | Cond. |
| Impact | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Charpy Notched Impact Strengh | |||
-30℃ (-22℉) | *** kJ/m² | ISO 179/1eA | Dry |
23℃ (73℉) | *** kJ/m² | ISO 179/1eA | Cond. |
23℃ (73℉) | *** kJ/m² | ISO 179/1eA | Dry |
Charpy Unnotched Impact Strengh | |||
-30℃ (-22℉) | *** kJ/m² | ISO 179/1eU | Dry |
23℃ (73℉) | *** kJ/m² | ISO 179/1eU | Cond. |
23℃ (73℉) | *** kJ/m² | ISO 179/1eU | Dry |
| Thermal | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Heat Deflection Temperature(HDT) | |||
1.8 Mpa (264 psi)（18.6kg/cm²） | *** °C | ISO 75-1/-2 | |
Coefficient of Linear Thermal Expansion | |||
Flow | *** E-6/K | ISO 11359-1/-2 | |
Melt Temperature(Tm) | *** °C | ISO 11357-1/-3 |
The information presented on this datasheet was acquired by AjiEng.com from the producer of the material. AjiEng.com makes substantial efforts to assure the accuracy of this data. However, AjiEng.com assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.
