Low-warpage injection molding grade with 20 % glass fibres for technical parts, for which dimensional stability is very important (e.g.housings, plug-and-socket connectors).
Abbreviated designation according to ISO 1043: PBT-ASA-GF20
| Original Document | Technical Datasheet(English) | |||
| Resin ID | (PBT+ASA)-GF20 | |||
| Features | Dimensional StabilityLow WarpageFilled & Reinforced | |||
| Applications | HousingsTechnical PartsConnectors | |||
| Processing | Injection | |||
| Diagrams | Dynamic Shear modulus-temperatureStress-strain(Break)Secant modulus-strain(Break)Tensile modulus-temperature | |||
| Reinforced | 20% Glass Fiber | |||
| Physical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
|---|---|---|---|
Density/Specific Gravity | *** g/cm³ | ISO 1183 | |
Mold Shrinkage | |||
Across Flow | *** % | ISO 294-4 | |
Molding Shrinkage | |||
Flow | *** % | ISO 294-4 | |
Water Absorption | *** % | ISO 62 | |
Moisture /Humidity Absorption | *** % | ISO 62 | |
Viscosity | *** cm³/g | ISO 1628 | |
| Mechanical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Tensile Modulus | *** Mpa | ISO 527 | 23℃ |
Tensile Strength | |||
Break | *** Mpa | ISO 527 | 23℃ |
Tensile Elongation | |||
Break | *** % | ISO 527 | 23℃ |
| Impact | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Charpy Unnotched Impact Strengh | |||
23℃ (73℉) | *** kJ/m² | ISO 179 | |
Izod Notched Impact Strengh | |||
23℃ (73℉) | *** kJ/m² | ISO 180 | |
| Thermal | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Heat Deflection Temperature(HDT) | |||
0.45 Mpa (66 psi)（4.6kg/cm²） | *** °C | ISO 75 | |
1.8 Mpa (264 psi)（18.6kg/cm²） | *** °C | ISO 75 | |
Melt Temperature(Tm) | *** °C | ISO 11357-1/-3 | |
| Electrical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Volume Resistivity | *** Ohm-m | IEC 60093 | |
Surface Resistivity | *** Ohm | IEC 60093 | |
Dielectric Strength | *** kV/mm | IEC 60243-1 |
The information presented on this datasheet was acquired by AjiEng.com from the producer of the material. AjiEng.com makes substantial efforts to assure the accuracy of this data. However, AjiEng.com assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.
