PC/ABS polymer alloy, Non-halogen type flame resistant series
| Original Document | Technical Datasheet(English) | |||
| Features | High ImpactFlame RetardantHalogen FreeMedical Application/Health Care | |||
| Additive | Flame Retardant | |||
| Appearance | Pellets/GranulesNatural Color | |||
| Processing | Injection | |||
| Physical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
|---|---|---|---|
Density/Specific Gravity | *** g/cm³ | ISO 1183 | |
Mold Shrinkage | |||
Flow | ***~*** % | Internal | 4mm |
Across Flow | ***~*** % | Internal | 4mm |
| Mechanical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Tensile Modulus | *** Mpa | ISO 527-2/1 | |
Tensile Strength | |||
Yield | *** Mpa | ISO 527-2/50 | |
Break | *** Mpa | ISO 527-2/50 | |
Tensile Elongation | |||
Break | *** % | ISO 527-2/50 | |
Flexural Modulus | *** Mpa | ISO 178 | 2 mm/min |
Flexural Strength | |||
- | *** Mpa | ISO 178 | 2 mm/min |
| Impact | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Charpy Notched Impact Strengh | |||
23℃ (73℉) | *** kJ/m² | ISO 179 | |
| Thermal | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Heat Deflection Temperature(HDT) | |||
1.8 Mpa (264 psi)（18.6kg/cm²） | *** °C | ISO 75-2/A | Unannealed |
Relative Temperature Index(RTI), Imp | |||
0.45mm | *** °C | UL 746B | |
Relative Temperature Index(RTI), Elec | |||
0.45mm | *** °C | UL 746B | |
Relative Temperature Index(RTI), Str | |||
0.45mm | *** °C | UL 746B | |
Coefficient of Linear Thermal Expansion | |||
Flow | *** E-6 cm/cm/℃ | ISO 11359-2 | |
Across Flow | *** E-6 cm/cm/℃ | ISO 11359-2 | |
| Flammability | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Flame Rating | |||
HB | *** mm | UL94 | |
V-2 | *** mm | UL94 | |
V-1 | *** mm | UL94 | |
V-0 | *** mm | UL94 | |
5VB | *** mm | UL94 | |
| Electrical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Surface Resistivity | *** Ohm | IEC 60093 |
The information presented on this datasheet was acquired by AjiEng.com from the producer of the material. AjiEng.com makes substantial efforts to assure the accuracy of this data. However, AjiEng.com assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.
