Typical characteristics
- Certified according to EN 45545-2
- Self-extinguishing
Typical industries
- Vehicle Construction
| Original Document | Technical Datasheet(English) | |||
| Features | Flame RetardantWear/Abrasion ResistanceLow Friction/Wear | |||
| Markets | Vehicle Construction | |||
| Appearance | SheetRodBlack | |||
| Compliance | EN 45545 | |||
| Physical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
|---|---|---|---|
Density/Specific Gravity | *** g/cm³ | ISO 1183 | |
Water Absorption | *** % | ISO 62 | |
Average Molecular Weight | *** g/mol | Internal | |
| Mechanical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Tensile Modulus | *** Mpa | ISO 527 | |
Tensile Strength | |||
Yield | *** Mpa | ISO 527 | |
| Impact | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Charpy Notched Impact Strengh | |||
- | *** kJ/m² | ISO 179 | |
| Hardness | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Shore D hardness | *** D | ISO 868 | |
| Thermal | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Vicat Softening Temperature(VST) | *** °C | ISO 306/B | |
Coefficient of Linear Thermal Expansion | |||
- | ***~*** E-6/K | DIN 53752 | |
Melt Temperature(Tm) | ***~*** °C | ISO 11357-3 | |
Thermal Conductivity | *** W/(m K) | DIN 52612-1 | |
Continuous Use Temperature | |||
Long term | ***~*** °C | Internal | long term |
Temperature at Short Circle Operation | *** °C | Internal | |
| Flammability | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Flame Rating | |||
V-0 | *** mm | UL94 | |
V-0 | *** mm | UL94 | |
| Electrical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Volume Resistivity | *** Ohm-cm | IEC 62631-3-1 | |
Surface Resistivity | *** Ohm | IEC 62631-3-2 |
The information presented on this datasheet was acquired by AjiEng.com from the producer of the material. AjiEng.com makes substantial efforts to assure the accuracy of this data. However, AjiEng.com assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.
