ELTEX® SuperstressTM TUB121N6000 is a bimodal high-density polyethylene copolymer produced by INEOS Innovene-S process.
It is characterized as PE 100 Black compound in accordance with ISO 12162 based on ISO 9080 analysis.
ELTEX® SuperstressTM TUB121N6000 is designed for the production of pipes by extrusion, as well as for the production of fittings in a broad range of shapes and dimensions by injection molding.
Benefits & Features ELTEX® SuperstressTM TUB121N6000 fulfils the PE 100-RC requirements according to the latest versions of the EN and ISO standards for the transport of water (EN 12201 and ISO 4427) and gas (EN 1555 and ISO 4437) under pressure, and for industrial applications (EN ISO 15494).
This PE 100-RC compound provides a step-out performance of increased stress cracking resistance and is designed to allow maximum safety under all installation conditions and reduction of installation costs using, for examples, no dig trenchless techniques, sandless laying or other non-conventional installation techniques that may increase the risk of scratches along the pipes.
ELTEX® SuperstressTM TUB121N6000 conforms to the requirements of NSF/ANSI Standard 14 - Plastics Piping System Components and Related Materials for Potable Water Applications (PW).
Applications
• Gas
• Water
• Industrial
| Original Document | Technical Datasheet(English) | |||
| Features | Drinking Water ContactESCRCopolymer | |||
| Applications | Pressure PipesPipes/TubesPotable/drinking Water Pipes | |||
| Appearance | Pellets/GranulesBlack | |||
| Processing | InjectionExtrusionTube Extrusion | |||
| Compliance | EN 12201EN 1555-1ISO 4427ISO 4437-1ISO 9080NSF | |||
| Reinforced | 2~2.5% Carbon black | |||
| Physical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
|---|---|---|---|
Density/Specific Gravity | *** g/cm³ | ISO 1183 | |
Melt Mass Flow Rate(MFR) | |||
190℃/5 kg | *** g/10 min | ISO 1133 | |
| Mechanical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Tensile Modulus | *** Mpa | ISO 527-2 | 23°C, 1 mm/min |
Tensile Strength | |||
Yield | *** Mpa | ISO 527-2 | 23°C |
Tensile Elongation | |||
Break | *** % | ISO 527-2 | 23°C, 50 mm/min |
Resistance to rapid crack propagation | *** bar | ISO 13477 | 0°C, 250 SDR11 pipes |
| Thermal | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Vicat Softening Temperature(VST) | *** °C | ISO 306/A50 | 10N |
| Additional Information | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Oxidative Induction Time | *** Min | ISO 11357 | 210°C |
The information presented on this datasheet was acquired by AjiEng.com from the producer of the material. AjiEng.com makes substantial efforts to assure the accuracy of this data. However, AjiEng.com assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.
