High Density Polyethylene – Milk blow moulding resins
Benefits & Features
ELTEX® LGB163N2045 high density polyethylene is a white homopolymer manufactured by INEOS O&P Europe. It contains 5% titanium dioxide and is intended for the co-extrusion of bottles for the packaging of UHT sterilized milk.
The resin is specifically designed for 1-, 3- or 6- layer bottles.
It guarantees the preservation of the organoleptic properties of milk and has the following essential properties :
High density, ensuring good rigidity of finished products
A melt viscosity which ensures easy processing
A very low odour level
| Original Document | Technical Datasheet(English) | |||
| Features | High Stiffness/RigidityLow OdorHomopolymer | |||
| Applications | UHT Milk Bottles | |||
| Processing | Blow MoldingCo-extrusion | |||
| Reinforced | 5% TiO₂ | |||
| Physical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
|---|---|---|---|
Density/Specific Gravity | *** g/cm³ | ISO 1183 | |
Melt Mass Flow Rate(MFR) | |||
190℃/2.16 kg | *** g/10min | ISO 1133 | |
Viscosity | *** Pa-s | Internal | 190°C and 100 s-1 |
| Mechanical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Tensile Modulus | *** Mpa | ISO 527-2 | 1 mm/min |
Tensile Strength | |||
Yield | *** Mpa | ISO 527-2 | 50 mm/min |
FNCT | *** hr | ISO 16770 | 40°C, 6 N/mm² 2% Arkopal N100 |
| Impact | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Charpy Notched Impact Strengh | |||
23℃ (73℉) | *** kJ/m² | ISO 179-1/1eA | |
| Thermal | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Melt Temperature(Tm) | *** °C | ISO 11357-3 | DSC 2nd heating 10°C/min |
The information presented on this datasheet was acquired by AjiEng.com from the producer of the material. AjiEng.com makes substantial efforts to assure the accuracy of this data. However, AjiEng.com assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.
