ELTEX® B4020N1343 is a High Density Polyethylene copolymer manufactured by INEOS Olefins & Polymers Europe using its proprietary supported catalyst & process, particularly intended for the injection and compression moulding of screw caps for the packaging of beverages.
Benefits & Features
Good stress cracking resistance
Good processing performances
High impact strength
Excellent quality controlled organoleptic properties
Grade containing a slip agent ensuring easy cap application and opening
Applications
ELTEX® B4020N1343 is especially suitable for applications requiring good environmental stress cracking resistance. Thanks to high purity and excellent organoleptic properties, this grade is particularly intended for packaging in direct contact with beverages.
Caps & closures for the packaging of sparkling water and carbonated soft drinks
| Original Document | Technical Datasheet(English) | |||
| Features | High ImpactSlidingEasy processingESCRCopolymer | |||
| Additive | Slip agent | |||
| Applications | Caps/Closures | |||
| Processing | InjectionCompression Moulding | |||
| Physical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
|---|---|---|---|
Density/Specific Gravity | *** g/cm³ | ISO 1183 | |
Melt Mass Flow Rate(MFR) | |||
190℃/2.16 kg | *** g/10min | ISO 1133 | |
Environmental Stress Cracking Resistance | *** Hours | Internal | 40°C, 6 bar, 10% Igepal |
| Mechanical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Tensile Modulus | *** Mpa | ISO 527-2 | 1 mm/min |
Tensile Strength | |||
Yield | *** Mpa | ISO 527-1/-2 | |
| Impact | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Charpy Notched Impact Strengh | |||
23℃ (73℉) | *** kJ/m² | ISO 179-1/1eA |
The information presented on this datasheet was acquired by AjiEng.com from the producer of the material. AjiEng.com makes substantial efforts to assure the accuracy of this data. However, AjiEng.com assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.
