ELTEX® B2020LG/34 is a High Density Polyethylene – Milk blow moulding resin.
Benefits & Features
A very low odour level guaranteeing the organoleptic properties of milk
Good rigidity
Good impact strength
Easy processing
Applications
ELTEX® B2020LG/34 is a white copolymer, it contains 4.5 % titanium dioxide and is intended for the co extrusion of bottles for the packaging of UHT sterilized milk.
The resin is specifically designed for 3- or 6- layer bottles
| Original Document | Technical Datasheet(English) | |||
| Features | Good StiffnessGood Impact ResistanceEasy processingLow OdorCopolymer | |||
| Applications | BottlesFood PackagingUHT Milk Bottles | |||
| Appearance | Pellets/GranulesWhite | |||
| Processing | ExtrusionBlow Molding | |||
| Reinforced | 4.5% TiO₂ | |||
| Physical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
|---|---|---|---|
Density/Specific Gravity | *** g/cm³ | ISO 1183 | |
Melt Mass Flow Rate(MFR) | |||
190℃/2.16 kg | *** g/10min | ISO 1133 | |
Viscosity | *** dl/g | Internal | 160°C, Inherent viscosity in tetralene |
Viscosity | *** Pa-s | Internal | 190°C and 100 s-1 |
| Mechanical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Tensile Modulus | *** Mpa | ISO 527-2 | 1 mm/min |
Tensile Strength | |||
Yield | *** Mpa | ISO 527-2 | 50 mm/min |
FNCT | *** hr | ISO 16770 | 40°C, 6 N/mm² 2% Arkopal N100 |
| Impact | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Charpy Notched Impact Strengh | |||
23℃ (73℉) | *** kJ/m² | ISO 179-1/1eA | |
| Thermal | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Melt Temperature(Tm) | *** °C | ISO 11357-3 | DSC 2nd heating 10°C/min |
The information presented on this datasheet was acquired by AjiEng.com from the producer of the material. AjiEng.com makes substantial efforts to assure the accuracy of this data. However, AjiEng.com assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.
