Hostalen PP HP1886T is low flow PP random copolymer with good stiffness/toughness balance, outstanding creep and stress cracking resistance. Hostalen PP HP1886T features low haze and yellowing resistance in contact with cooling water. Typical customer use is automotive expansion tanks (surge tanks). Hostalen PP HP1886T is not intended for medical and pharmaceutical applications.
| Original Document | Technical Datasheet(English) | |||
| Status | Developmental | |||
| Availability | AsiaEuropeAustralia and New Zealand | |||
| Features | Good StiffnessStiffness/Impact BalanceGood Impact ResistanceHeat ResistanceCreep ResistantESCRChemical Resistance | |||
| Applications | Under the hood auto partsAutomotive Expansion Tanks | |||
| Markets | Automotive | |||
| Processing | Injection | |||
| Physical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
|---|---|---|---|
Density/Specific Gravity | *** g/cm³ | ISO 1183 | |
Melt Mass Flow Rate(MFR) | |||
230°C/5 kg | *** g/10 min | ISO 1133 | |
| Mechanical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Tensile Strength | |||
Yield | *** Mpa | ISO 527-1/-2 | 23 °C |
Tensile Elongation | |||
Yield | *** % | ISO 527-1/-2 | |
Flexural Modulus | *** Mpa | ISO 178 | |
| Impact | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Charpy Notched Impact Strengh | |||
23℃ (73℉) | *** kJ/m² | ISO 179 | |
| Thermal | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Heat Deflection Temperature(HDT) | |||
0.45 Mpa (66 psi)（4.6kg/cm²） | *** °C | ISO 75-1/-2 | Unannealed |
The information presented on this datasheet was acquired by AjiEng.com from the producer of the material. AjiEng.com makes substantial efforts to assure the accuracy of this data. However, AjiEng.com assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.
