Softell TKG 2039N C1 Natural is a 25% glassfiber reinforced thermoplastic polyolefin compound for injection moulding. This grade is typically used on aesthetical interior applications. It combines soft touch haptics, good stiffness and toughness balance, a very good sound dampening and an excellent scratch resistance. The grade is available in colour, pellet form.
| Original Document | Technical Datasheet(English) | |||
| Status | Commercial: Active | |||
| Availability | Asia | |||
| Features | Stiffness/Impact BalanceAnti-ScratchDimensional StabilityHigh FlowFilled & ReinforcedNoise DampingSoft | |||
| Markets | Automotive | |||
| Appearance | Pellets/GranulesColors Available | |||
| Processing | Injection | |||
| Reinforced | 25% Glass Fiber | |||
| Physical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
|---|---|---|---|
Density/Specific Gravity | *** g/cm³ | ISO 1183 | |
Melt Mass Flow Rate(MFR) | |||
230°C/2.16 kg | *** g/10min | ISO 1133 | |
| Mechanical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Flexural Modulus | *** Mpa | ISO 178 | 23 °C, Tech. A |
| Impact | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Charpy Notched Impact Strengh | |||
-30℃ (-22℉) | *** kJ/m² | ISO 179-1/1eA | |
23℃ (73℉) | *** kJ/m² | ISO 179-1/1eA | |
| Thermal | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Heat Deflection Temperature(HDT) | |||
0.45 Mpa (66 psi)（4.6kg/cm²） | *** °C | ISO 75-1/-2 | Unannealed |
The information presented on this datasheet was acquired by AjiEng.com from the producer of the material. AjiEng.com makes substantial efforts to assure the accuracy of this data. However, AjiEng.com assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.
