Sequel 1496-PUV very high melt flow rate, medium high flexural modulus engineered polyolefin material is designed for large exterior automotive applications requiring stiffness-impact balance, excellent paintability, and processability.
| Original Document | Technical Datasheet(English) | |||
| Status | Limited Issue | |||
| Availability | North America | |||
| Features | Good StiffnessStiffness/Impact BalanceGood Impact ResistanceEasy processingGood PaintablilityHigh Flow | |||
| Applications | Automotive PartsAutomotive Exterior TrimsBumper products | |||
| Appearance | Pellets/GranulesBlack | |||
| Processing | Injection | |||
| Physical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
|---|---|---|---|
Density/Specific Gravity | *** g/cm³ | ASTM D792 | |
Melt Mass Flow Rate(MFR) | |||
230°C/2.16 kg | *** g/10min | ASTM D 1238 | |
| Mechanical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Tensile Strength | |||
Yield | *** Mpa | ASTM D638 | 50 mm/min - Type 1 |
Tensile Elongation | |||
Break | *** % | ASTM D638 | 50 mm/min - Type 1 |
Flexural Modulus | *** Mpa | ASTM D790 | 30 mm/min, 1/4, HES D2502 |
| Impact | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Izod Notched Impact Strengh | |||
-30℃ (-22℉) | *** J/m | ASTM D256 | |
| Thermal | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Heat Deflection Temperature(HDT) | |||
0.45 Mpa (66 psi)（4.6kg/cm²） | *** °C | ASTM D648 | Unannealed |
0.45 Mpa (66 psi)（4.6kg/cm²） | *** °C | ISO 75/A | Unannealed |
Coefficient of Linear Thermal Expansion | |||
Flow | *** E-6/°C | ASTM D 696 | Method SEPLTM |
The information presented on this datasheet was acquired by AjiEng.com from the producer of the material. AjiEng.com makes substantial efforts to assure the accuracy of this data. However, AjiEng.com assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.
