Hostacom TRC 2016N C1 C12594 is a 10% talc filled PP copolymer, with high flowability, good impact/stiffness balance. Advanced technologies allowed for a significant reduction of mineral filler which contributed to the reduction of final part weight.This grade could be delivered in customized colors.
| Original Document | Technical Datasheet(English) | |||
| Status | Commercial: Active | |||
| Availability | Asia | |||
| Features | Stiffness/Impact BalanceHigh ImpactAnti-ScratchMold ReleaseHigh FlowCopolymerFilled & Reinforced | |||
| Applications | Automotive PartsAutomotive Interior Trims | |||
| Appearance | Pellets/GranulesColors Available | |||
| Processing | Injection | |||
| Reinforced | 10% Talc | |||
| Physical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
|---|---|---|---|
Density/Specific Gravity | *** g/cm³ | ISO 1183 | |
Melt Mass Flow Rate(MFR) | |||
230°C/2.16 kg | *** g/10min | ISO 1133 | |
| Mechanical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Tensile Strength | |||
Yield | *** Mpa | ISO 527-1/-2 | 23 °C |
Flexural Modulus | *** Mpa | ISO 178 | |
| Impact | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Charpy Notched Impact Strengh | |||
-40℃ (-40℉) | *** kJ/m² | ISO 179-1/1eA | |
23℃ (73℉) | *** kJ/m² | ISO 179-1/1eA |
The information presented on this datasheet was acquired by AjiEng.com from the producer of the material. AjiEng.com makes substantial efforts to assure the accuracy of this data. However, AjiEng.com assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.
