Hostacom TRC 1193N E5 NAT is high melt flow, low density mineral filled polypropylene copolymer for injection moulding.
It has an excellent balance of processability, rigidity, impact, scratch and mar resistance. The grade has been specifically designed for moulding of interior trim parts or components that require good dimensional stability and superior surface appearance properties.
This grade is delivered in natural color.
This product is also available in other colors, new colors can be developed depending on customer requirements.
| Original Document | Technical Datasheet(English) | |||
| Status | Commercial: Active | |||
| Availability | Europe | |||
| Features | High Stiffness/RigidityHigh ImpactGood SurfaceAnti-ScratchDimensional StabilityUV StabiltiyHigh FlowCopolymerLow DensityFilled & Reinforced | |||
| Applications | Automotive PartsAutomotive Interior Trims | |||
| Markets | Automotive | |||
| Appearance | Pellets/GranulesColors AvailableNatural Color | |||
| Processing | Injection | |||
| Reinforced | Mineral | |||
| Physical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
|---|---|---|---|
Density/Specific Gravity | *** g/cm³ | ISO 1183 | |
Melt Mass Flow Rate(MFR) | |||
230°C/2.16 kg | *** g/10min | ISO 1133 | |
| Mechanical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Tensile Strength | |||
Yield | *** Mpa | ISO 527-1/-2 | |
Flexural Modulus | *** Mpa | ISO 178 | |
| Impact | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Charpy Notched Impact Strengh | |||
-40℃ (-40℉) | *** kJ/m² | ISO 179-1/1eA | |
23℃ (73℉) | *** kJ/m² | ISO 179-1/1eA | |
| Thermal | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Heat Deflection Temperature(HDT) | |||
1.8 Mpa (264 psi)（18.6kg/cm²） | *** °C | ISO 75-1/-2 | Unannealed |
The information presented on this datasheet was acquired by AjiEng.com from the producer of the material. AjiEng.com makes substantial efforts to assure the accuracy of this data. However, AjiEng.com assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.
