Hostacom G2 R03 C 105555 is a glass fiber reinforced PP polymer, with good dimensional stability at elevated temperatures. It has a good balance of stiffness and toughness and is typically used on carrier part in automotive and appliance.
| Original Document | Technical Datasheet(English) | |||
| Status | Commercial: Active | |||
| Availability | Asia | |||
| Features | Stiffness/Impact BalanceGood Impact ResistanceDimensional StabilityEasy processingFilled & Reinforced | |||
| Applications | Home appliancesAutomotive Parts | |||
| Markets | Automotive | |||
| Processing | Injection | |||
| Reinforced | Glass Fiber | |||
| Physical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
|---|---|---|---|
Density/Specific Gravity | *** g/cm³ | ISO 1183 | |
Melt Mass Flow Rate(MFR) | |||
230°C/2.16 kg | *** g/10min | ISO 1133 | |
| Mechanical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Tensile Strength | |||
Break | *** Mpa | ISO 527-1/-2 | 23 °C |
Flexural Modulus | *** Mpa | ISO 178 | 23 °C, Tech. A |
| Impact | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Charpy Notched Impact Strengh | |||
23℃ (73℉) | *** kJ/m² | ISO 179-1/1eA |
The information presented on this datasheet was acquired by AjiEng.com from the producer of the material. AjiEng.com makes substantial efforts to assure the accuracy of this data. However, AjiEng.com assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.
