Main features
- high toughness
- resistant to many oils, greases and fuels
- electrically insulating
- good wear properties
- good weldable and bondable
- good slide and wear properties
- high strength
- good machinability
Target Industries
- mechanical engineering
- aircraft and aerospace technology
- electronics
- food technology
- automotive industry
| Original Document | Technical Datasheet(English) | |||
| Features | High StrengthGood ToughnessInsulatingWear/Abrasion ResistanceGood WeldResistant To GreasesOil ResistantHydrocarbon Resistant | |||
| Appearance | SlabRodpipeIvory | |||
| Physical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
|---|---|---|---|
Water Absorption | *** % | ISO 62 | 24h, 23°C |
Water Absorption | *** % | ISO 62 | 96h, 23°C |
| Mechanical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Tensile Modulus | *** Mpa | ISO 527-2 | 1mm/min |
Tensile Strength | |||
Yield | *** Mpa | ISO 527-2 | 50mm/min |
- | *** Mpa | ISO 527-2 | 50mm/min |
Tensile Elongation | |||
Yield | *** % | ISO 527-2 | 50mm/min |
Break | *** % | ISO 527-2 | 50mm/min |
Flexural Modulus | *** Mpa | ISO 178 | 2mm/min, 10 N |
Flexural Strength | |||
- | *** Mpa | ISO 178 | 2mm/min, 10 N |
Compressive Modulus | *** Mpa | ISO 604 | 5mm/min, 10 N |
Compressive Strength | *** Mpa | ISO 604 | 1%, 5mm/min, 10 N |
Compressive Strength | *** Mpa | ISO 604 | 2%, 5mm/min, 10 N |
Compressive Strength | *** Mpa | ISO 604 | 5%, 5mm/min, 10 N |
| Impact | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Charpy Notched Impact Strengh | |||
- | *** kJ/m² | ISO 179-1/1eA | max. 7,5J |
Charpy Unnotched Impact Strengh | |||
- | *** kJ/m² | ISO 179/1eU | max. 7,5J |
| Hardness | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Shore D hardness | *** D | ISO 868 | |
| Thermal | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Specific Heat | *** J/kg-K | ISO 22007-4 | |
Coefficient of Linear Thermal Expansion | |||
Flow | *** E-6/K | ISO 11359-1/-2 | 23-100°C |
Flow | *** E-6/K | ISO 11359-1/-2 | 23-60°C |
Melt Temperature(Tm) | *** °C | ISO 11357 | |
Glass Transition Temperature | *** °C | ISO 11357 | |
Thermal Conductivity | *** W/(m K) | ISO 22007-4 | |
Continuous Use Temperature | |||
Long term | *** °C | Internal | long term |
Temperature at Short Circle Operation | *** °C | Internal | |
| Flammability | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Flame Rating | |||
HB | *** mm | UL94 | |
| Electrical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Volume Resistivity | *** Ohm-cm | IEC 60093 | Silver electrode, 23°C, 12% r.h. |
Surface Resistivity | *** Ohm | IEC 60093 | Silver electrode, 23°C, 12% r.h. |
Comparative Tracking Index (CTI) | |||
Solution A | *** V | IEC 60112 | Platin electrode, 23°C, 50% r.h., |
Dielectric Strength | *** kV/mm | IEC 60243-1 | 23°C, 50% r.h. |
The information presented on this datasheet was acquired by AjiEng.com from the producer of the material. AjiEng.com makes substantial efforts to assure the accuracy of this data. However, AjiEng.com assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.
