Dexflex 990-PUV NH533 is a mineral filled, thermoplastic elastomeric olefin (TPO) resin that is typically used for exterior automotive applications.
| Original Document | Technical Datasheet(English) | |||
| Status | Limited Issue | |||
| Availability | North America | |||
| Features | UV StabiltiyFilled & Reinforced | |||
| Applications | Automotive PartsAutomotive Exterior Trims | |||
| Processing | Injection | |||
| Reinforced | Mineral | |||
| Physical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
|---|---|---|---|
Density/Specific Gravity | *** g/cm³ | ASTM D792 | |
Melt Mass Flow Rate(MFR) | |||
- | *** g/10min | ASTM D1238 | |
| Mechanical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Tensile Strength | |||
Yield | *** Mpa | ASTM D638 | 23 °C, 50 mm/min |
Flexural Modulus | *** Mpa | ASTM D790 | 23 °C, 30 mm/min |
| Impact | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Izod Notched Impact Strengh | |||
23℃ (73℉) | *** J/m | ASTM D256 |
The information presented on this datasheet was acquired by AjiEng.com from the producer of the material. AjiEng.com makes substantial efforts to assure the accuracy of this data. However, AjiEng.com assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.
