CirculenRC PPC TYC 1168P 848 BLK high melt flow, low density, UV-stabilized, mineral filled thermoplastic elastomeric olefin (TEO) resin with recycled content that has an excellent balance of properties and processability. It has good stiffness and excellent cold temperature impact. It is typically used for mold-in color exterior trim and fascia applications.
| Original Document | Technical Datasheet(English) | |||
| Status | Commercial: Active | |||
| Availability | North America | |||
| Features | Good StiffnessHigh Impact at Low TemperaturEasy processingMold In ColorUV StabiltiyHigh FlowLow DensityFilled & ReinforcedRecycled Contained | |||
| Applications | Automotive PartsAutomotive Exterior TrimsBumper products | |||
| Markets | Automotive | |||
| Appearance | Pellets/GranulesBlack | |||
| Processing | Injection | |||
| Reinforced | Mineral | |||
| Physical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
|---|---|---|---|
Density/Specific Gravity | *** g/cm³ | ISO 1183 | |
Melt Mass Flow Rate(MFR) | |||
230°C/2.16 kg | *** g/10min | ISO 1133 | |
| Mechanical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Tensile Strength | |||
Yield | *** Mpa | ISO 527-1/-2 | 23 °C |
Flexural Modulus | *** Mpa | ISO 178 | 23 °C |
| Impact | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Charpy Notched Impact Strengh | |||
-30℃ (-22℉) | *** kJ/m² | ISO 179 | |
23℃ (73℉) | *** kJ/m² | ISO 179 | |
Multiaxial Impact | *** J | Internal | -30 °C, 2.2 m/s, 3.2 mm plaque |
The information presented on this datasheet was acquired by AjiEng.com from the producer of the material. AjiEng.com makes substantial efforts to assure the accuracy of this data. However, AjiEng.com assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.
