Purell HP571R is a polypropylene homopolymer used for extrusion applications. It has a very narrow molecular weight distribution and is formulated with an anti-gasfading stabilisation package.
Purell HP571R is used for the production of continuous filaments. Typical applications are high-tenacity yarns (HTY) and spunbond nonwovens.
All potential activities for applications in the pharmaceutical, medical device, laboratory and diagnostics area have to be discussed with the relevant Technical and Business contacts first. To discuss a medical/pharmaceutical application please contact your local Lyondellbasell reference or your local Distributor.
| Original Document | Technical Datasheet(English) | |||
| Status | Commercial: Active | |||
| Features | Anti gas-fadingHigh FlowHomopolymerNarrow Molecular Weight | |||
| Applications | NonwovensHygiene ProductsAir Filtration MediaWipesHigh Tenacity Yarns | |||
| Markets | Textile | |||
| Appearance | Pellets/GranulesNatural Color | |||
| Processing | ExtrusionSpinning/Monofilament | |||
| Physical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
|---|---|---|---|
Density/Specific Gravity | *** g/cm³ | ISO 1183 | |
Melt Mass Flow Rate(MFR) | |||
230°C/2.16 kg | *** g/10min | ISO 1133 | |
| Mechanical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Tensile Strength | |||
Yield | *** Mpa | ISO 527-1/-2 | 23 °C, 50 mm/min |
Break | *** Mpa | ISO 527-1/-2 | 23 °C, 50 mm/min |
Tensile Elongation | |||
Yield | *** % | ISO 527-1/-2 | 23 °C, 50 mm/min |
Break | *** % | ISO 527-1/-2 | 23 °C, 50 mm/min |
Flexural Modulus | *** Mpa | ISO 178 | |
| Thermal | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Heat Deflection Temperature(HDT) | |||
0.45 Mpa (66 psi)（4.6kg/cm²） | *** °C | ISO 75-2/B | Unannealed |
Vicat Softening Temperature(VST) | *** °C | ISO 306/A50 | A (10N), 50 °C/h |
The information presented on this datasheet was acquired by AjiEng.com from the producer of the material. AjiEng.com makes substantial efforts to assure the accuracy of this data. However, AjiEng.com assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.
