Moplen HP552R PF is a polypropylene homopolymer suitable for extrusion applications. Moplen HP552R PF is formulated with an anti-gasfading stabilisation package. Moplen HP552R PF is used for the production of bulk continuous filaments and fine denier staple fibres. Typical applications are carpet, upholstery, ropes etc.
| Original Document | Technical Datasheet(English) | |||
| Status | Commercial: Active | |||
| Availability | AsiaMiddle EastAfricaAustralia and New Zealand | |||
| Features | Anti gas-fadingHomopolymer | |||
| Additive | Anti-gas Fading | |||
| Applications | RopesYarnsFilamentCarpet | |||
| Markets | Textile | |||
| Processing | InjectionExtrusionSpinning/Monofilament | |||
| Physical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
|---|---|---|---|
Density/Specific Gravity | *** g/cm³ | ISO 1183 | |
Melt Mass Flow Rate(MFR) | |||
230°C/2.16 kg | *** g/10min | ISO 1133 | |
| Mechanical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Tensile Strength | |||
Yield | *** Mpa | ISO 527-1/-2 | 23 °C, 50 mm/min |
Break | *** Mpa | ISO 527-1/-2 | 23 °C, 50 mm/min |
Tensile Elongation | |||
Yield | *** % | ISO 527-1/-2 | 23 °C, 50 mm/min |
Break | *** % | ISO 527-1/-2 | 23 °C, 50 mm/min |
Flexural Modulus | *** Mpa | ISO 178 | |
| Thermal | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Heat Deflection Temperature(HDT) | |||
0.45 Mpa (66 psi)（4.6kg/cm²） | *** °C | ISO 75-1/-2 | Unannealed |
Vicat Softening Temperature(VST) | *** °C | ISO 306/A50 |
The information presented on this datasheet was acquired by AjiEng.com from the producer of the material. AjiEng.com makes substantial efforts to assure the accuracy of this data. However, AjiEng.com assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.
