Polyfort LPP10BD07HB-BKBLK is a Polypropylene Homopolymer Calcium Carbonate, 10% filled material and is typically used in Injection Molding applications. Features include: Homopolymer.
| Original Document | Technical Datasheet(English) | |||
| Status | Commercial: Active | |||
| Availability | North AmericaLatin America | |||
| Features | HomopolymerFilled & Reinforced | |||
| Appearance | Pellets/GranulesBlack | |||
| Processing | Injection | |||
| Reinforced | 10% Calcium Carbonate | |||
| Physical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
|---|---|---|---|
Density/Specific Gravity | *** g/cm³ | ASTM D792 | |
Melt Mass Flow Rate(MFR) | |||
230°C/2.16 kg | *** g/10min | ASTM D 1238 | |
| Mechanical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Tensile Strength | |||
- | *** Mpa | ASTM D 638 | 23 °C |
Tensile Elongation | |||
Break | *** % | ASTM D638 | 23 °C |
Flexural Modulus | *** Mpa | ASTM D790 | 23 °C, 1% Secant |
Flexural Modulus | *** Mpa | ASTM D790 | 23 °C, Tangent |
Flexural Strength | |||
- | *** Mpa | ASTM D790 | 23 °C |
| Impact | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Izod Notched Impact Strengh | |||
23℃ (73℉) | *** J/m | ASTM D256 | |
Izod Unnotched Impact Strengh | |||
23℃ (73℉) | *** J/m | ASTM D4812 | |
Falling Dart Impact | *** J | ASTM D 5420 | Gardner Impact, (23 °C) |
| Thermal | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Heat Deflection Temperature(HDT) | |||
0.45 Mpa (66 psi)（4.6kg/cm²） | *** °C | ASTM D648 | |
1.8 Mpa (264 psi)（18.6kg/cm²） | *** °C | ASTM D648 |
The information presented on this datasheet was acquired by AjiEng.com from the producer of the material. AjiEng.com makes substantial efforts to assure the accuracy of this data. However, AjiEng.com assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.
