Zytel® ST801HS NC010 is a heat stabilized Super Tough polyamide 66 resin. It offers outstanding impact resistance and high productivity.
| Original Document | Technical Datasheet(English) | |||
| Features | Good ToughnessToughened/Impact ModifiedHeat StabilizedFast Cycle Time | |||
| Additive | Impact ModifierHeat Stabilizer | |||
| Appearance | Pellets/GranulesNatural Color | |||
| Processing | Injection | |||
| Physical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
|---|---|---|---|
Density/Specific Gravity | *** g/cm³ | ASTM D792 | |
Mold Shrinkage | |||
Flow | *** % | Internal | 3.2mm (0.126in) |
Water Absorption | *** % | ASTM D570 | Immersion 24h |
Water Absorption | *** % | ASTM D570 | Saturation |
| Mechanical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Tensile Strength | |||
- | *** Mpa | ASTM D 638 | 50%RH,-40°C (-40°F) |
- | *** Mpa | ASTM D 638 | 50%RH,23°C (73°F) |
- | *** Mpa | ASTM D 638 | Dry, -40°C (-40°F) |
- | *** Mpa | ASTM D 638 | Dry,121°C (250°F) |
- | *** Mpa | ASTM D 638 | Dry,23°C (73°F) |
- | *** Mpa | ASTM D 638 | Dry,77°C (170°F) |
Tensile Elongation | |||
Break | *** % | ASTM D638 | 50%RH,-40°C (-40°F) |
Break | *** % | ASTM D638 | 50%RH,23°C (73°F) |
Break | *** % | ASTM D638 | 50%RH,77°C (170°F) |
Break | *** % | ASTM D638 | Dry, -40°C (-40°F) |
Break | *** % | ASTM D638 | Dry,121°C (250°F) |
Break | *** % | ASTM D638 | Dry,23°C (73°F) |
Break | *** % | ASTM D638 | Dry,77°C (170°F) |
Flexural Modulus | *** Mpa | ASTM D790 | 50%RH,-40°C (-40°F) |
Flexural Modulus | *** Mpa | ASTM D790 | 50%RH,121°C (250°F) |
Flexural Modulus | *** Mpa | ASTM D790 | 50%RH,23°C (73°F) |
Flexural Modulus | *** Mpa | ASTM D790 | 50%RH,77°C (170°F) |
Flexural Modulus | *** Mpa | ASTM D790 | Dry, -40°C (-40°F) |
Flexural Modulus | *** Mpa | ASTM D790 | Dry,121°C (250°F) |
Flexural Modulus | *** Mpa | ASTM D790 | Dry,23°C (73°F) |
Flexural Modulus | *** Mpa | ASTM D790 | Dry,77°C (170°F) |
Poisson Ratio | *** - | - | 50%RH |
Shear Strength | *** Mpa | ASTM D 732 | Dry |
| Impact | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Izod Notched Impact Strengh | |||
-40℃ (-40℉) | *** J/m | ASTM D256 | 50%RH |
-40℃ (-40℉) | *** J/m | ASTM D256 | Dry |
23℃ (73℉) | *** J/m | ASTM D256 | 50%RH |
23℃ (73℉) | *** J/m | ASTM D256 | Dry |
Tensile Impact | *** kJ/m² | ASTM D 1822 | 50%RH |
Tensile Impact | *** kJ/m² | ASTM D 1822 | Dry |
| Hardness | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Rockwell R | *** R | ASTM D785 | 50%RH |
Rockwell R | *** R | ASTM D785 | Dry |
| Thermal | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Heat Deflection Temperature(HDT) | |||
0.45 Mpa (66 psi)（4.6kg/cm²） | *** °C | ASTM D648 | Annealed |
1.8 Mpa (264 psi)（18.6kg/cm²） | *** °C | ASTM D648 | Annealed |
Relative Temperature Index(RTI), Imp | |||
0.75/0.8mm | *** °C | UL 746B | |
1.5/1.6 mm | *** °C | UL 746B | |
3.0/3.2 mm | *** °C | UL 746B | |
Relative Temperature Index(RTI), Elec | |||
0.75/0.8mm | *** °C | UL 746B | |
1.5/1.6 mm | *** °C | UL 746B | |
3.0/3.2 mm | *** °C | UL 746B | |
Relative Temperature Index(RTI), Str | |||
0.75/0.8mm | *** °C | UL 746B | |
1.5/1.6 mm | *** °C | UL 746B | |
3.0/3.2 mm | *** °C | UL 746B | |
Coefficient of Linear Thermal Expansion | |||
Flow | *** E-6/°C | ASTM D 696 | 23 - 55°C |
Melt Temperature(Tm) | *** °C | ASTM D3418 | |
| Flammability | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Flame Rating | |||
HB | *** mm | UL94 | |
HB | *** mm | UL94 | |
HB | *** mm | UL94 | |
Oxygen Index | *** % | ASTM D 2863 | 50%RH |
Oxygen Index | *** % | ASTM D 2863 | Dry |
| Electrical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Volume Resistivity | *** Ohm-cm | ASTM D257 | 50%RH |
Volume Resistivity | *** Ohm-cm | ASTM D257 | Dry |
Dielectric Constant(Permittivity) | |||
100Hz | *** - | ASTM D 150 | 50%RH |
100Hz | *** - | ASTM D 150 | Dry |
1 kHz | *** - | ASTM D 150 | 50%RH |
1 kHz | *** - | ASTM D 150 | Dry |
1MHz | *** - | ASTM D 150 | 50%RH |
1MHz | *** - | ASTM D 150 | Dry |
Dissipation Factor | |||
100Hz | *** E-4 | ASTM D 150 | 50%RH |
100Hz | *** E-4 | ASTM D 150 | Dry |
1 kHz | *** E-4 | ASTM D 150 | 50%RH |
1 kHz | *** E-4 | ASTM D 150 | Dry |
1MHz | *** E-4 | ASTM D150 | 50%RH |
1MHz | *** E-4 | ASTM D150 | Dry |
Comparative Tracking Index (CTI) | |||
- | *** V | UL 746A | Dry,3.0mm |
Arc Resistance | *** sec | ASTM D495 | Dry |
High Voltage Arc Tracking Rate(HVTR) | *** mm/min | UL 746A | |
Hot Wire Ignition(HWI) | *** sec | UL 746A | 0.75mm |
Hot Wire Ignition(HWI) | *** sec | UL 746A | 1.5mm |
Hot Wire Ignition(HWI) | *** sec | UL 746A | 3.0mm |
High Ampere Arc Ignition(HAI) | *** arcs | UL 746A | 0.75mm |
High Ampere Arc Ignition(HAI) | *** arcs | UL 746A | 1.5mm |
High Ampere Arc Ignition(HAI) | *** arcs | UL 746A | 3.0mm |
The information presented on this datasheet was acquired by AjiEng.com from the producer of the material. AjiEng.com makes substantial efforts to assure the accuracy of this data. However, AjiEng.com assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.
