RAMSTER PF310G6BK11 is Black, 30% Glass Fiber Reinforced, UV Stabilized PBT/PET , Injection Molding Applications
Regulations:
ROHS2: ROHS Compliance
SVHC: SVHC Compliance
Conflict Minerals
| Original Document | Technical Datasheet(English) | |||
| Features | UV StabiltiyFilled & Reinforced | |||
| Additive | UV-Stabilizer | |||
| Appearance | Pellets/GranulesBlack | |||
| Processing | Injection | |||
| Compliance | REACH (EC 1907/2006)RoHS | |||
| Reinforced | 30% Glass Fiber | |||
| Physical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
|---|---|---|---|
Density/Specific Gravity | *** g/cm³ | ISO 1183 | |
Melt Mass Flow Rate(MFR) | |||
280°C/5.0 kg | *** g/10 min | ISO 1133 | |
Mold Shrinkage | |||
Flow | ***~*** % | Internal | 2mm |
Across Flow | ***~*** % | Internal | 2mm |
Moisture /Humidity Absorption | *** % | ISO 62 | |
| Mechanical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Tensile Modulus | *** Mpa | ISO 527-2/1A | |
Tensile Strength | |||
- | *** Mpa | ISO 527-2/1A | |
Tensile Elongation | |||
Break | *** % | ISO 527-2/1A | |
| Impact | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Izod Notched Impact Strengh | |||
- | *** kJ/m² | ISO 180 | |
| Thermal | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Heat Deflection Temperature(HDT) | |||
0.45 Mpa (66 psi)（4.6kg/cm²） | *** °C | ISO 75 | |
1.8 Mpa (264 psi)（18.6kg/cm²） | *** °C | ISO 75 |
The information presented on this datasheet was acquired by AjiEng.com from the producer of the material. AjiEng.com makes substantial efforts to assure the accuracy of this data. However, AjiEng.com assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.
