PLUSTEK PB306G6BL151 is Blue, 30% Glass Fiber Reinforced, Heat Stabilized,Improved Surface,Food and Water Approved Grade POLYAMIDE 6, Injection Molding Applications
This product is food contact standards compliant.
Regulations:
Drinking Water Certificate
ROHS2: ROHS Compliance
EU 10/2011: Monomer and additives are listed as authorized monomers/additives In Annex I of regulations (EC) No. 10/2011.
SVHC: SVHC Compliance
| Original Document | Technical Datasheet(English) | |||
| Features | Heat StabilizedGood SurfaceFood ContactDrinking Water ContactFilled & Reinforced | |||
| Additive | Heat Stabilizer | |||
| Appearance | Pellets/GranulesBlue | |||
| Processing | Injection | |||
| Compliance | REACH (EC 1907/2006)RoHS | |||
| Reinforced | 30% Glass Fiber | |||
| Physical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
|---|---|---|---|
Density/Specific Gravity | *** g/cm³ | ISO 1183 | |
Mold Shrinkage | |||
Flow | *** % | Internal | 2mm |
Across Flow | *** % | Internal | 2mm |
Water Absorption | *** % | ISO 62 | |
Moisture /Humidity Absorption | *** % | ISO 62 | |
| Mechanical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Tensile Modulus | *** Mpa | ISO 527-2/1A | |
Tensile Strength | |||
- | *** Mpa | ISO 527-2/1A | |
Tensile Elongation | |||
Break | *** % | ISO 527-2/1A | |
| Impact | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Izod Notched Impact Strengh | |||
- | *** kJ/m² | ISO 180 | |
| Thermal | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Heat Deflection Temperature(HDT) | |||
0.45 Mpa (66 psi)（4.6kg/cm²） | *** °C | ISO 75 | |
1.8 Mpa (264 psi)（18.6kg/cm²） | *** °C | ISO 75 |
The information presented on this datasheet was acquired by AjiEng.com from the producer of the material. AjiEng.com makes substantial efforts to assure the accuracy of this data. However, AjiEng.com assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.
