PLUSTEK PB302G50BK39P is Black, 50% Glass Fiber Reinforced, UV Stabilized,Heat Stabilized,Improved Surface Appearance POLYAMIDE 6, Injection Molding Applications such as: Irrigation,High Pressure
Regulations:
Drinking Water Certificate
ROHS2: ROHS Compliance
Conflict Minerals
| Original Document | Technical Datasheet(English) | |||
| Features | Heat StabilizedGood SurfaceDrinking Water ContactUV StabiltiyFilled & Reinforced | |||
| Additive | UV-StabilizerHeat Stabilizer | |||
| Appearance | Pellets/GranulesBlack | |||
| Processing | Injection | |||
| Compliance | RoHS | |||
| Reinforced | 50% Glass Fiber | |||
| Physical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
|---|---|---|---|
Density/Specific Gravity | *** g/cm³ | ISO 1183 | |
Mold Shrinkage | |||
Flow | ***~*** % | Internal | 2mm |
Across Flow | ***~*** % | Internal | 2mm |
Water Absorption | *** % | ISO 62 | |
Moisture /Humidity Absorption | *** % | ISO 62 | |
| Mechanical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Tensile Modulus | *** Mpa | ISO 527-2/1A | |
Tensile Strength | |||
- | *** Mpa | ISO 527-2/1A | |
Tensile Elongation | |||
Break | *** % | ISO 527-2/1A | |
Flexural Modulus | *** Mpa | ISO 178 | |
Flexural Strength | |||
- | *** Mpa | ISO 178 | |
| Impact | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Izod Notched Impact Strengh | |||
- | *** kJ/m² | ISO 180 | |
| Thermal | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Heat Deflection Temperature(HDT) | |||
0.45 Mpa (66 psi)（4.6kg/cm²） | *** °C | ISO 75 | |
1.8 Mpa (264 psi)（18.6kg/cm²） | *** °C | ISO 75 |
The information presented on this datasheet was acquired by AjiEng.com from the producer of the material. AjiEng.com makes substantial efforts to assure the accuracy of this data. However, AjiEng.com assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.
