| Physical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Density/Specific Gravity |
*** g/cm³
| ISO 1183 | |
Melt Volume Flow Rate(MVR) | | | |
190℃/2.16 kg |
*** cm³/10min | ISO 1133 | |
Melt Mass Flow Rate(MFR) | | | |
190℃/2.16 kg |
*** g/10min | ISO 1133 | |
Mold Shrinkage | | | |
Flow |
*** % | ISO 294-4 | 60×60×2mmt |
Across Flow |
*** % | ISO 294-4 | 60×60×2mmt |
Water Absorption |
*** %
| ISO 62 | 23℃,24hrs,1mmt |
| Mechanical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Tensile Modulus |
*** Mpa
| ISO 527-1/-2 | |
Tensile Strength | | | |
- |
*** Mpa | ISO 527-1/-2 | |
Tensile Elongation | | | |
Nominal Tensile Strain at Break |
*** % | ISO 527-1/-2 | |
Flexural Modulus |
*** Mpa
| ISO 178 | |
Flexural Strength | | | |
- |
*** Mpa | ISO 178 | |
Coefficient of Friction |
*** -
| JIS K 7218 | Thrust,vs CSteel,pressure 0.98MPa,30cm/s |
Coefficient of Friction |
*** -
| JIS K 7218 | Thrust,vs M90-44,pressure0.06MPa,15cm/s |
Wear Factor |
*** E-3 mm³/(N･km)
| JIS K 7218 | Thrust,vs C-Steel,material side,pressure 0.98MPa,30cm/s |
Wear Factor |
*** E-3 mm³/(N･km)
| JIS K 7218 | Thrust,vs C-Steel,steel side,pressure 0.98MPa,30cm/s |
Wear Factor |
*** E-3 mm³/(N･km)
| JIS K 7218 | Thrust,vs M90-44,M90-44 side,pressure 0.06MPa,15cm/s |
Wear Factor |
*** E-3 mm³/(N･km)
| JIS K 7218 | Thrust,vs M90-44,material side,pressure 0.06MPa,15cm/s |
| Impact | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Charpy Notched Impact Strengh | | | |
23℃ (73℉) |
*** kJ/m² | ISO 179/1eA | |
| Hardness | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Rockwell M |
*** M
| ISO 2039-2 | |
| Thermal | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Heat Deflection Temperature(HDT) | | | |
1.8 Mpa (264 psi)（18.6kg/cm²） |
*** °C | ISO 75-1/-2 | |
Coefficient of Linear Thermal Expansion | | | |
Flow |
*** E-6/°C | Internal | 23-55℃ |
Across Flow |
*** E-6/°C | Internal | 23-55℃ |
| Flammability | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Flame Rating | | | |
HB |
*** mm | UL94 | |
| Electrical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Volume Resistivity |
*** Ohm-cm
| IEC 60093 | |
Surface Resistivity |
*** Ohm
| IEC 60093 | |
Dielectric Strength |
*** kV/mm
| IEC 60243-1 | 3mmt |
The information presented on this datasheet was acquired by AjiEng.com from the producer of the material. AjiEng.com makes substantial efforts to assure the accuracy of this data. However, AjiEng.com assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.
