Partially aromatic polyphthalamide for injection molding and extrusion with strong mechanical properties especially at elevated temperatures, good long-term thermal stability and excellent chemical resistance for highly stressed parts. The product can be characterized as polymer with high toughness, extremely low water absorption, outstanding dimensional stability and very good wear/sliding friction properties. It features a high melting point (300°C) and excellent melt stability.
Markets & applications
Automotive: Gear wheels, valves, powertrain, extrusion applications, tribo applications
Industry goods: Tribo applications, extruded lines
Consumer goods: Home appliances, rollers, consumer electronics
| Original Document | Technical Datasheet(English) | |||
| Features | Heat ResistanceGood Heat AgingWear/Abrasion ResistanceLow Friction/WearDimensional StabilityChemical ResistanceLow Moisture Absorption | |||
| Applications | Electronics & Electrical ApplicationsHome appliancesHighly stressed partsValvesRollers | |||
| Appearance | Pellets/GranulesBlack | |||
| Processing | InjectionExtrusion | |||
| Physical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
|---|---|---|---|
Mold Shrinkage | |||
Flow | *** % | ISO 294-4 | |
Across Flow | *** % | ISO 294-4 | |
Viscosity | *** cm³/g | ISO 307, 1157, 1628 | 0.5% in 96% H2SO4 |
| Mechanical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Tensile Modulus | *** Mpa | ISO 527-1/-2 | Dry, 23°C |
Tensile Strength | |||
Yield | *** Mpa | ISO 527-1/-2 | Dry, 23°C |
Break | *** Mpa | ISO 527-1/-2 | Dry, 23°C |
Tensile Elongation | |||
Yield | *** % | ISO 527-1/-2 | Dry, 23°C |
Break | *** % | ISO 527-1/-2 | Dry, 23°C |
| Impact | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Charpy Notched Impact Strengh | |||
-30℃ (-22℉) | *** kJ/m² | ISO 179/1eA | Dry |
23℃ (73℉) | *** kJ/m² | ISO 179/1eA | Dry |
Charpy Unnotched Impact Strengh | |||
-30℃ (-22℉) | *** kJ/m² | ISO 179/1eU | Dry |
23℃ (73℉) | *** kJ/m² | ISO 179/1eU | Dry |
| Thermal | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Melt Temperature(Tm) | *** °C | ISO 11357-1/-3 | DSC |
Processing Temperature | ***~*** °C | - | Injection moulding/Extrusion |
Processing Temperature | *** °C | - | Test specimen production, injection moulding |
Mould temperature | ***~*** °C | - | Injection moulding |
Mould temperature | *** °C | - | Test specimen production, injection moulding |
The information presented on this datasheet was acquired by AjiEng.com from the producer of the material. AjiEng.com makes substantial efforts to assure the accuracy of this data. However, AjiEng.com assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.
