Partially aromatic, glassfiber reinforced polyphthalamide for injection molding with strong mechanical properties especially at elevated temperatures, good long-term thermal stability and outstanding chemical resistance for highly stressed parts. Ultramid® Advanced N3HG6 LT BK can be characterized as compound with high toughness, stiffness, extremely low water absorption and outstanding dimensional stability. It features high flowability and allows filling of complex parts with thin wall thickness. Ultramid® Advanced N3HG6 LT BK is easily processable with excellent melt stability.
| Original Document | Technical Datasheet(English) | |||
| Resin ID | PA9T-GF30 | |||
| Features | Heat ResistanceLight TransmissionDimensional StabilityChemical ResistanceHigh FlowLow Moisture AbsorptionFilled & Reinforced | |||
| Applications | Thin wall injection moldingHighly stressed parts | |||
| Appearance | Pellets/GranulesBlack | |||
| Processing | Injection | |||
| Diagrams | Stress-strain(Break)Stress-strain (Cond.)(Break)Secant modulus-strain(Break)Secant modulus-strain (Cond.)(Break)Tensile modulus-temperatureTensile modulus-temperature (cond.) | |||
| Reinforced | 30% Glass Fiber | |||
| Physical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
|---|---|---|---|
Density/Specific Gravity | *** g/cm³ | ISO 1183 | |
Mold Shrinkage | |||
Flow | *** % | ISO 294-4 | |
Across Flow | *** % | ISO 294-4 | |
| Mechanical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Tensile Modulus | *** Mpa | ISO 527-1/-2 | Dry, 23°C |
Tensile Strength | |||
Break | *** Mpa | ISO 527-1/-2 | Dry, 23°C |
Tensile Elongation | |||
Break | *** % | ISO 527-1/-2 | Dry, 23°C |
| Impact | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Charpy Notched Impact Strengh | |||
-30℃ (-22℉) | *** kJ/m² | ISO 179/1eA | Dry |
23℃ (73℉) | *** kJ/m² | ISO 179/1eA | Dry |
Charpy Unnotched Impact Strengh | |||
-30℃ (-22℉) | *** kJ/m² | ISO 179/1eU | Dry |
23℃ (73℉) | *** kJ/m² | ISO 179/1eU | Dry |
| Thermal | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Heat Deflection Temperature(HDT) | |||
1.8 Mpa (264 psi)（18.6kg/cm²） | *** °C | ISO 75-1/-2 | |
Melt Temperature(Tm) | *** °C | ISO 11357-1/-3 | DSC |
Processing Temperature | *** °C | - | Test specimen production |
Processing Temperature | ***~*** °C | - | Injection moulding/Extrusion |
Mould temperature | *** °C | - | Test specimen production |
Mould temperature | ***~*** °C | - | Injection moulding |
| Optical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Light Transmission | *** % | DIN 5036-3 | d = 1 mm |
Light Transmission | *** % | DIN 5036-3 | d = 1.5 mm |
Light Transmission | *** % | DIN 5036-3 | d = 3 mm |
The information presented on this datasheet was acquired by AjiEng.com from the producer of the material. AjiEng.com makes substantial efforts to assure the accuracy of this data. However, AjiEng.com assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.
