High Performance PA, Injection Molding
| Original Document | Technical Datasheet(English) | |||
| Solutions | Robotics | |||
| Features | Filled & Reinforced | |||
| Processing | Injection | |||
| Reinforced | Glass Fiber | |||
| Physical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
|---|---|---|---|
Density/Specific Gravity | *** g/cm³ | ASTM D792 | 23℃ |
Mold Shrinkage | |||
Flow | ***~*** % | ASTM D955 | 2.0mm |
Across Flow | ***~*** % | ASTM D955 | 2.0mm |
Water Absorption | *** % | ASTM D570 | 23°C, 50% RH |
| Mechanical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Tensile Modulus | *** kg/cm² | ASTM D638 | 3.2mm, 5mm/min |
Tensile Strength | |||
Break | *** kg/cm² | ASTM D638 | 3.2mm, 5mm/min |
Tensile Elongation | |||
Break | *** % | ASTM D638 | 3.2mm, 5mm/min |
Flexural Modulus | *** kg/cm² | ASTM D790 | 6.4mm, 1.3mm/min |
Flexural Modulus | *** kg/cm² | ASTM D790 | 6.4mm, 10mm/min |
Flexural Strength | |||
- | *** kg/cm² | ASTM D790 | 6.4mm, 1.3mm/min |
- | *** kg/cm² | ASTM D790 | 6.4mm, 10mm/min |
| Impact | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Izod Notched Impact Strengh | |||
-30℃ (-22℉) | *** kg·cm/cm | ASTM D256 | 3.2mm |
-30℃ (-22℉) | *** kg·cm/cm | ASTM D256 | 6.4mm |
23℃ (73℉) | *** kg·cm/cm | ASTM D256 | 3.2mm |
23℃ (73℉) | *** kg·cm/cm | ASTM D256 | 6.4mm |
| Hardness | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Rockwell R | *** R | ASTM D785 | |
| Thermal | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Heat Deflection Temperature(HDT) | |||
0.45 Mpa (66 psi)（4.6kg/cm²） | *** °C | ASTM D648 | 6.4mm, Unannealed |
1.8 Mpa (264 psi)（18.6kg/cm²） | *** °C | ASTM D648 | 6.4mm, Unannealed |
Vicat Softening Temperature(VST) | *** °C | ASTM D1525 | 5kg, 50℃/hr |
Coefficient of Linear Thermal Expansion | |||
Flow | *** E-6/°C | ASTM D 696 | -30℃ ∼ 80℃ |
Across Flow | *** E-6/°C | ASTM D 696 | -30℃ ∼ 80℃ |
| Electrical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Volume Resistivity | *** Ohm-m | ASTM D257 | 23℃ |
Surface Resistivity | *** Ohm | ASTM D257 | 23℃ |
Dielectric Constant(Permittivity) | |||
- | *** - | ASTM D150 | 23℃ |
Dielectric Strength | *** kV/mm | ASTM D149 | 23℃, 2.0mm |
The information presented on this datasheet was acquired by AjiEng.com from the producer of the material. AjiEng.com makes substantial efforts to assure the accuracy of this data. However, AjiEng.com assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.
