PBT Compound, Injection Molding, General Purpose
| Original Document | Technical Datasheet-ISO(English) | |||
| Solutions | Radome Cover for ADAS SensorsCamera Body for ADAS Sensors | |||
| Features | Filled & ReinforcedLow DielectricFilled & Reinforced | |||
| Processing | Injection | |||
| Reinforced | 30% Glass Fiber | |||
| Physical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
|---|---|---|---|
Density/Specific Gravity | *** g/cm³ | ISO 1183 | 23°C |
Melt Mass Flow Rate(MFR) | |||
250°C/2.16 kg | *** g/10min | ISO 1133 | |
Mold Shrinkage | |||
Flow | ***~*** % | ISO 294-4 | 2.0mm |
Across Flow | ***~*** % | ISO 294-4 | 2.0mm |
Water Absorption | *** % | ISO 62 | 23°C, 50% RH |
| Mechanical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Tensile Modulus | *** Mpa | ISO 527 | 4.0mm, 1mm/min |
Tensile Strength | |||
Yield | *** Mpa | ISO 527 | 4.0mm, 5mm/min |
Break | *** Mpa | ISO 527 | 4.0mm, 5mm/min |
Tensile Elongation | |||
Break | *** % | ISO 527 | 4.0mm, 5mm/min |
Flexural Modulus | *** Mpa | ISO 178 | 4.0mm, 2.0mm/min |
Flexural Strength | |||
- | *** Mpa | ISO 178 | 4.0mm, 2.0mm/min |
| Impact | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Charpy Notched Impact Strengh | |||
-30℃ (-22℉) | *** kJ/m² | ISO 179 | 4.0mm |
23℃ (73℉) | *** kJ/m² | ISO 179 | 4.0mm |
Izod Notched Impact Strengh | |||
-30℃ (-22℉) | *** kJ/m² | ISO 180 | 4.0mm |
23℃ (73℉) | *** kJ/m² | ISO 180 | 4.0mm |
| Hardness | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Rockwell R | *** R | ISO 2039 | |
| Thermal | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Heat Deflection Temperature(HDT) | |||
0.45 Mpa (66 psi)（4.6kg/cm²） | *** °C | ISO 75 | 4.0mm, Flatwise Unannealed |
1.8 Mpa (264 psi)（18.6kg/cm²） | *** °C | ISO 75 | 4.0mm, Flatwise Unannealed |
Vicat Softening Temperature(VST) | *** °C | ISO 306 | 50N, 50℃/hr |
Relative Temperature Index(RTI), Imp | |||
1.5/1.6 mm | *** °C | UL 746B | |
Relative Temperature Index(RTI), Elec | |||
1.5/1.6 mm | *** °C | UL 746B | |
Relative Temperature Index(RTI), Str | |||
1.5/1.6 mm | *** °C | UL 746B | |
Coefficient of Linear Thermal Expansion | |||
Flow | *** E-6/°C | ISO 11359 | -30℃ ∼ 80℃ |
Across Flow | *** E-6/°C | ISO 11359 | -30℃ ∼ 80℃ |
| Flammability | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Flame Rating | |||
HB | *** mm | UL94 | |
| Electrical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Volume Resistivity | *** Ohm-m | IEC 60093 | 23℃ |
Surface Resistivity | *** Ohm | IEC 60093 | 23℃ |
Dielectric Constant(Permittivity) | |||
- | *** - | ASTM D150 | 23℃ |
The information presented on this datasheet was acquired by AjiEng.com from the producer of the material. AjiEng.com makes substantial efforts to assure the accuracy of this data. However, AjiEng.com assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.
