Description
-EBR(Ethylene-1-Butene copolymer)
-Excellent impact modifier
-For compounding automotive parts to reinforce low-temperature impact strength
Application
-Automotive interior/exterior
| Original Document | Technical Datasheet-ASTM(English) | |||
| Applications | Compounding/BlendingAutomotive Interior TrimsAutomotive Exterior TrimsImpact Modifier | |||
| Processing | Compounding | |||
| Physical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
|---|---|---|---|
Density/Specific Gravity | *** g/cm³ | ASTM D 1505 | |
Melt Mass Flow Rate(MFR) | |||
190℃/2.16 kg | *** g/10min | ASTM D1238 | |
Mooney Viscosity | *** MU | ASTM 1646 | ML1+4@121℃ |
| Mechanical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Tensile Strength | |||
Break | *** Mpa | ASTM D638 | 500㎜/min |
Tensile Elongation | |||
Break | *** % | ASTM D638 | 500㎜/min |
Flexural Modulus | *** Mpa | ASTM D790 | 1% Secant, Press sheet |
Tear Strength | *** kN/m | ASTM D 624 | Type C |
| Hardness | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Shore A hardness | *** A | ASTM D 2240 | |
| Thermal | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Melt Temperature(Tm) | *** °C | Internal | by DSC |
Glass Transition Temperature | *** °C | Internal | by DSC |
The information presented on this datasheet was acquired by AjiEng.com from the producer of the material. AjiEng.com makes substantial efforts to assure the accuracy of this data. However, AjiEng.com assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.
