Description
-EOR(Ethylene-1-Octene copolymer)
- For POP(Polyolefin Plastomer) film
Application
-Lamination film, Packaging Films
| Original Document | Technical Datasheet-ASTM(English) | |||
| Applications | FilmPackagingLamination Film | |||
| Processing | Film ExtrusionBlown Film | |||
| Physical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
|---|---|---|---|
Density/Specific Gravity | *** g/cm³ | ASTM D 1505 | |
Melt Mass Flow Rate(MFR) | |||
190℃/2.16 kg | *** g/10min | ASTM D1238 | |
| Thermal | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Melt Temperature(Tm) | *** °C | Internal | by DSC |
| Optical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Haze | *** % | ASTM D1003 | 50㎛ |
| Film | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Tensile Strength | |||
Break | *** kg/cm² | ASTM D 882 | MD, 500㎜/min |
Break | *** kg/cm² | ASTM D 882 | TD, 500㎜/min |
Tensile Elongation | |||
Break | *** % | ASTM D 882 | MD, 500㎜/min |
Break | *** % | ASTM D 882 | TD, 500㎜/min |
Puncture resistance | *** J/cm³ | ASTM D4833 | |
Elmondorf Tear | *** g/µm | ASTM D 1922 | MD, 500㎜/min |
Elmondorf Tear | *** g/µm | ASTM D 1922 | TD, 500㎜/min |
| Additional Information | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Yellowness Index | *** - | Internal |
The information presented on this datasheet was acquired by AjiEng.com from the producer of the material. AjiEng.com makes substantial efforts to assure the accuracy of this data. However, AjiEng.com assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.
