LI935 is an ASA with improved surface quality designed for metallized rear lamp housings
Key Features
Standard Purpose, Vacuum evaporation, Weatherability, Superior Surface Quality,
Metallization
Application
Rear Combination Lamp
| Original Document | Technical Datasheet-ISO(English) | |||
| Features | Good SurfaceMetal PlatingWeather Resistance | |||
| Applications | Rear Lamp HousingsRear Combination Lamp | |||
| Processing | Injection | |||
| Physical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
|---|---|---|---|
Density/Specific Gravity | *** g/cm³ | ISO 1183 | 23℃ |
Melt Mass Flow Rate(MFR) | |||
220℃/10 kg | *** g/10 min | ISO 1133 | |
Mold Shrinkage | |||
- | ***~*** % | ISO 294-4 | 23℃, 3.2mm |
| Mechanical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Tensile Strength | |||
Yield | *** Mpa | ISO 527 | 23℃, 50mm/min, 4mm |
Tensile Elongation | |||
Break | *** % | ISO 527 | 23℃, 50mm/min, 4mm |
Flexural Modulus | *** Mpa | ISO 178 | 23℃, 2mm/min, 4mm |
Flexural Strength | |||
- | *** Mpa | ISO 178 | 23℃, 2mm/min, 4mm |
| Impact | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Charpy Notched Impact Strengh | |||
-30℃ (-22℉) | *** kJ/m² | ISO 179/1eA | 4mm |
23℃ (73℉) | *** kJ/m² | ISO 179/1eA | 4mm |
Izod Notched Impact Strengh | |||
-30℃ (-22℉) | *** kJ/m² | ISO 180/1A | 4mm |
23℃ (73℉) | *** kJ/m² | ISO 180/1A | 4mm |
| Thermal | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Heat Deflection Temperature(HDT) | |||
0.45 Mpa (66 psi)（4.6kg/cm²） | *** °C | ISO 75 | 4mm, Annealed |
0.45 Mpa (66 psi)（4.6kg/cm²） | *** °C | ISO 75 | 4mm, Unannealed |
1.8 Mpa (264 psi)（18.6kg/cm²） | *** °C | ISO 75 | 4mm, Annealed |
1.8 Mpa (264 psi)（18.6kg/cm²） | *** °C | ISO 75 | 4mm, Unannealed |
Vicat Softening Temperature(VST) | *** °C | ISO 306 | 50N, 50℃/h |
The information presented on this datasheet was acquired by AjiEng.com from the producer of the material. AjiEng.com makes substantial efforts to assure the accuracy of this data. However, AjiEng.com assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.
