MRC380L5, a Post-Consumer Recycled ABS product for injection molding, contains 50% PCR resin and is designed to carry out light colors with the same physical properties as high-flow standard ABS. (Early stage of development : The data can be changed as a result of the quality improvement of the products)
Key Features
Recycled ABS (PCR 50%), High Flow
Application
Electrical/Electronic Products, Miscellaneous Goods
| Original Document | Technical Datasheet-ASTM(English) | |||
| Features | High FlowRecycled Contained | |||
| Applications | Electronics & Electrical Applications | |||
| Processing | Injection | |||
| Physical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
|---|---|---|---|
Density/Specific Gravity | ***~*** g/cm³ | ASTM D792 | 23℃ |
Melt Mass Flow Rate(MFR) | |||
220℃/10 kg | *** g/10 min | ASTM D 1238 | |
Mold Shrinkage | |||
- | ***~*** % | ASTM D955 | 23℃, 3.2mm |
Post Consumer Recycled | *** % | Internal | |
| Mechanical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Tensile Strength | |||
Yield | *** Mpa | ASTM D638 | 23℃, 50mm/min, 3.2mm |
Tensile Elongation | |||
Break | *** % | ASTM D638 | 23℃, 50mm/min, 3.2mm |
Flexural Modulus | *** Mpa | ASTM D790 | 23℃, 10mm/min, 6.4mm |
Flexural Strength | |||
- | *** Mpa | ASTM D790 | 23℃, 10mm/min, 6.4mm |
| Impact | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Izod Notched Impact Strengh | |||
23℃ (73℉) | *** J/m | ASTM D256 | 3.2mm |
23℃ (73℉) | *** J/m | ASTM D256 | 6.4mm |
| Hardness | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Rockwell R | *** R | ASTM D785 | |
| Thermal | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Heat Deflection Temperature(HDT) | |||
1.8 Mpa (264 psi)（18.6kg/cm²） | *** °C | ASTM D648 | 6.4mm, Unannealed |
| Flammability | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Flame Rating | |||
HB | *** mm | UL94 | |
HB | *** mm | UL94 |
The information presented on this datasheet was acquired by AjiEng.com from the producer of the material. AjiEng.com makes substantial efforts to assure the accuracy of this data. However, AjiEng.com assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.
