CRI558M3, a Transparent Pre-Consumer Recycled ABS product for injection molding, contains 30% PCR resin and is designed to have the same physical properties as standard TR ABS, having good transparency and balance between the impact strength and fluidity.
Key Features
Transparency, Recycled ABS (PCR 30%)
Application
-Washing Machine, Refrigerator, Electrical/Electronic Products,
-Miscellaneous Goods
| Original Document | Technical Datasheet-ASTM(English) | |||
| Features | High TransparencyLight TransmissionRecycled Contained | |||
| Applications | Electronics & Electrical ApplicationsRefrigerator applicationsWashing Machine Parts | |||
| Appearance | Pellets/GranulesClear/Transparent | |||
| Processing | Injection | |||
| Physical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
|---|---|---|---|
Density/Specific Gravity | *** g/cm³ | ASTM D792 | 23℃ |
Melt Mass Flow Rate(MFR) | |||
220℃/10 kg | *** g/10 min | ASTM D 1238 | |
Post Consumer Recycled | *** % | Internal | |
| Mechanical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Tensile Strength | |||
Yield | *** Mpa | ASTM D638 | 23℃, 50mm/min, 3.2mm |
Tensile Elongation | |||
Break | *** % | ASTM D638 | 23℃, 50mm/min, 3.2mm |
Flexural Modulus | *** Mpa | ASTM D790 | 23℃, 10mm/min, 6.4mm |
Flexural Strength | |||
- | *** Mpa | ASTM D790 | 23℃, 10mm/min, 6.4mm |
| Impact | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Izod Notched Impact Strengh | |||
23℃ (73℉) | *** J/m | ASTM D256 | 6.4mm |
| Hardness | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Rockwell R | *** R | ASTM D785 | |
| Thermal | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Heat Deflection Temperature(HDT) | |||
1.8 Mpa (264 psi)（18.6kg/cm²） | *** °C | ASTM D648 | 6.4mm, Unannealed |
| Optical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Light Transmission | *** % | ASTM D1003 | 3.2mm |
Haze | *** % | ASTM D1003 |
The information presented on this datasheet was acquired by AjiEng.com from the producer of the material. AjiEng.com makes substantial efforts to assure the accuracy of this data. However, AjiEng.com assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.
