Finalloy EBP-15X6 UC9B9/4 is a mineral-filled and impact modified polypropylene-based compound that has a very low linear thermal expansion in combination with high modulus, good processability, good scratch resistance and reduced tiger marks.
Finalloy EBP-15X6 UC9B9/4 is UV stabilized and optimized for good surface aspect. It is particularly suitable for the injection moulding of unpainted automotive exterior parts like rocker panels, wheel arches, door trim lists and other parts which require low thermal expansion.
| Original Document | Technical Datasheet(English) | |||
| Features | Toughened/Impact ModifiedGood SurfaceAnti-ScratchLow CLTEEasy processingUV StabiltiyFilled & Reinforced | |||
| Additive | UV-StabilizerImpact Modifier | |||
| Applications | Automotive Exterior TrimsRocker PanelsWheel ArchesDoor Trim | |||
| Processing | Injection | |||
| Reinforced | Mineral | |||
| Physical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
|---|---|---|---|
Density/Specific Gravity | *** g/cm³ | ISO 1183 | |
Melt Mass Flow Rate(MFR) | |||
230°C/2.16 kg | *** g/10min | ISO 1133 | |
Mold Shrinkage | |||
Flow | ***~*** % | Internal | t=3mm |
| Mechanical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Tensile Strength | |||
Yield | *** Mpa | ISO 527 | |
Tensile Elongation | |||
Yield | *** % | ISO 527 | |
Break | *** % | ISO 527 | |
Flexural Modulus | *** Mpa | ISO 178 | |
| Impact | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Charpy Notched Impact Strengh | |||
-20℃ (-4℉) | *** kJ/m² | ISO 179/1eA | |
23℃ (73℉) | *** kJ/m² | ISO 179/1eA | |
| Hardness | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Shore D hardness | *** D | ISO 868 | |
| Thermal | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Heat Deflection Temperature(HDT) | |||
0.45 Mpa (66 psi)（4.6kg/cm²） | *** °C | ISO 75-2 | 120°C per hour |
Vicat Softening Temperature(VST) | *** °C | ISO 306/A50 | 10N, 50°C/h |
Coefficient of Linear Thermal Expansion | |||
- | *** E-6/K | ISO 11359-2 | |
Melt Temperature(Tm) | ***~*** °C | Internal |
The information presented on this datasheet was acquired by AjiEng.com from the producer of the material. AjiEng.com makes substantial efforts to assure the accuracy of this data. However, AjiEng.com assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.
