Finalloy SMV-65 is a 10% mineral-filled and impact-modified polypropylene-based compound that combines a good impact-rigidity balance with very good processability. This material has been developed to meet new specifications for low VOC emissions.
Finalloy SMV-65 is particularly suitable for the injection moulding of non-painted, visible automotive interior parts that require an excellent scratch resistance. The impact strength of the material is very high, which makes this grade suitable for applications that have to fulfil e.g. knee, side and head impact requirements.
| Original Document | Technical Datasheet(English) | |||
| Features | High ImpactToughened/Impact ModifiedAnti-ScratchEasy processingLow EmissionFilled & Reinforced | |||
| Additive | Impact Modifier | |||
| Applications | Automotive Exterior Trims | |||
| Processing | Injection | |||
| Reinforced | 10% Mineral | |||
| Physical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
|---|---|---|---|
Density/Specific Gravity | *** g/cm³ | ISO 1183 | |
Melt Mass Flow Rate(MFR) | |||
230°C/2.16 kg | *** g/10min | ISO 1133 | |
Mold Shrinkage | |||
Flow | ***~*** % | Internal | t=3mm |
| Mechanical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Tensile Modulus | *** Mpa | ISO 527 | |
Tensile Strength | |||
Yield | *** Mpa | ISO 527 | |
Tensile Elongation | |||
Yield | *** % | ISO 527 | |
Break | *** % | ISO 527 | |
Flexural Modulus | *** Mpa | ISO 178 | |
| Impact | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Charpy Notched Impact Strengh | |||
-30℃ (-22℉) | *** kJ/m² | ISO 179/1eA | |
-20℃ (-4℉) | *** kJ/m² | ISO 179/1eA | |
23℃ (73℉) | *** kJ/m² | ISO 179/1eA | |
Charpy Unnotched Impact Strengh | |||
-30℃ (-22℉) | *** kJ/m² | ISO 179/1eU | |
23℃ (73℉) | *** kJ/m² | ISO 179/1eU | |
| Thermal | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Heat Deflection Temperature(HDT) | |||
0.45 Mpa (66 psi)（4.6kg/cm²） | *** °C | ISO 75-2 | 120°C per hour |
Coefficient of Linear Thermal Expansion | |||
- | *** E-6/K | ISO 11359-2 | |
Melt Temperature(Tm) | ***~*** °C | Internal |
The information presented on this datasheet was acquired by AjiEng.com from the producer of the material. AjiEng.com makes substantial efforts to assure the accuracy of this data. However, AjiEng.com assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.
